Bearing Bronze Hollow Bars serve as an efficient choice of material for creating elements used under friction, loading, and motion conditions. Generally produced in UNS C93200 (SAE 660) grade, this leaded tin bronze provides good machinability, wear resistance, and bearing characteristics for precision parts. The pre bored centre saves boring time and material when you make sleeves, bearings, thrust washers and other cylindrical parts. They can be obtained in continuous and centrifugal cast types for different machining needs. USA Piping Solution delivers Bearing Bronze Hollow Bars with heat traceability and EN 10204 3.1 mill test certificates, dispatched in the USA.
Specifications of Bearing Bronze Hollow Bar
|
Specification |
Detail |
|---|---|
|
Primary Grade |
UNS C93200 (SAE 660 / 83 7 7 3 High Leaded Tin Bronze) |
|
Manufacturing Process |
Continuous Cast (ASTM B505) or Centrifugal Cast (ASTM B271) |
|
Density |
8.93 g/cm³ (0.323 lb/in³ at 68 °F) |
|
Typical Hardness |
65 HB (500 kg load) |
|
Machinability Rating |
70% (Free cutting brass = 100%) |
|
Confirmed Size Range |
Outer diameter, inner bore, and wall thickness confirmed against your drawing at quotation |
|
Certification |
EN 10204 3.1 Mill Test Certificate |
Applications and Industrial Uses of Bearing Bronze Hollow Bar
- Industrial Pump Shaft Bearings
- Agricultural Machinery Bushings
- Conveyor Roller Bearings
- Hydraulic Cylinder Pivot Bushings
- Gearbox Thrust Washers
- Construction Equipment Wear Sleeves
- Machine Tool Spindle Bushings
- Industrial Worm Gear Components
Frequently Asked Questions
1. What is bearing bronze hollow bar?
Bearing bronze hollow bar is a pre bored tin bronze product used to manufacture bearings, bushings, sleeves and other wear resistant components.
2. What is the UNS grade of SAE 660 bearing bronze?
The UNS grade of SAE 660 bearing bronze is C93200.
3. What is the difference between C93200 and SAE 660 bronze?
C93200 is the UNS designation, while SAE 660 is the commonly used trade designation for the same bearing bronze alloy.
4. What is the difference between continuous cast and centrifugal cast bearing bronze?
Continuous casting produces bronze bars through a continuous casting process, while centrifugal casting uses rotational force to form the metal inside a mould.
5. Is C93200 bearing bronze suitable for heavy load applications?
Yes, C93200 offers good load bearing capacity and wear resistance for properly designed and lubricated bearing applications.
6. Can bearing bronze hollow bars be machined easily?
Yes, C93200 bearing bronze offers good machinability (rating 70, where free cutting brass is 100), making it suitable for producing precision bushings, bearings and sleeves.
7. Is bearing bronze better than brass for bushings?
Bearing bronze C93200 contains lead and tin for wear resistance and conformability under sliding loads. High tensile brass suits higher strength demands. Share your load and speed requirements, and we can recommend a suitable grade.