Brass Hollow Rods

C67300 High Tensile Brass Hollow Rods Manufacturer, Supplier and Exporter

Get a Quick Quote
Grade
UNS C67300
Material
Leaded Manganese Bronze
Copper (Cu)
58.0 to 63.0%
Manganese (Mn)
2.0 to 3.5%
Silicon (Si)
0.50 to 1.5%

C67300 high tensile brass hollow rods are extruded hollow bar in UNS C67300, a leaded manganese bronze made of about 60% copper, 2 to 3.5% manganese, 0.5 to 1.5% silicon and 0.4 to 3.0% lead, with zinc making up the rest. The bore is already in the bar, so your shop skips the drilling step and stops paying for metal that only ends up as swarf. That is why machinists reach for c67300 hollow bar when they make bushings, bearings, seal rings and valve parts.

At USA Piping Solution we supply c67300 brass hollow rod as hollow round bar, with hex and square sections on request, in the as extruded or cold drawn condition. Every lot ships with an EN 10204 3.1 mill test certificate.

Request a Quote

Specification Basis for C67300 Hollow Bar

Item

Statement

Alloy

UNS C67300, leaded manganese bronze, also sold as high tensile brass

Product form

Extruded hollow round bar, hex and square on request, as extruded or cold drawn

Machinability

Rating 70, where free cutting brass C36000 is 100

Mechanical values

Reference minimums for solid bar; hollow bar confirmed at quotation

Certification

EN 10204 3.1 mill test certificate

Applications of C67300 High Tensile Brass Hollow Rods

C67300 High Tensile Brass Hollow Rods are used in components that require strength, wear resistance and good machinability. Common applications include:

  • Bushings and Sleeve Bearings: Used in rotating assemblies to support shafts and reduce friction.
  • Valve Guides and Seats: Suitable for valve components requiring strength and wear resistance.
  • Seal Rings and Sleeves: Used in industrial equipment for reliable component fitment.
  • Gears and Cams: Suitable for machined parts requiring dimensional accuracy.
  • Nuts and Fasteners: Used for manufacturing durable threaded components.
  • Pump Components: Applied in selected pump parts exposed to mechanical wear.

Looking for C67300 High Tensile Brass Hollow Rods? Contact USA Piping Centre with your required dimensions, quantity and specifications to request a quotation.

Request a Quote

Frequently Asked Questions

1. What is C67300?

C67300 is a leaded manganese bronze, also known as high tensile brass. It contains approximately 60% copper, with manganese, silicon, lead and zinc.

2. Is C67300 brass or bronze?

C67300 is commonly called both brass and manganese bronze. Its copper and zinc content classifies it as brass by composition, while trade usage calls it manganese bronze.

3. What is the composition of C67300?

C67300 contains copper 58.0 to 63.0%, lead 0.40 to 3.0%, manganese 2.0 to 3.5%, silicon 0.50 to 1.5%, with zinc as the remainder.

4. What is the tensile strength of C67300?

Solid bars have a reference minimum tensile strength of 448 MPa, yield strength of 276 MPa and 11% elongation for sizes under 25.4 mm.

5. What is the machinability rating of C67300?

C67300 has a machinability rating of 70, compared with free cutting brass C36000, which has a reference rating of 100.

6. Why choose hollow rods instead of drilling solid bar?

Hollow rods have a preformed bore, reducing drilling time and material consumption. A 60 mm OD rod with a 30 mm bore weighs approximately 25% less.

7. What sizes of hollow rod do you supply?

We supply hollow round bars in various outside diameters and bores, with hexagonal and square sections available on request, subject to availability.

8. What are C67300 hollow rods used for?

C67300 hollow rods are used for bushings, sleeve bearings, seal rings, valve guides, valve seats, nuts, sleeves, gears, cams and pump components.

Request a Quote for C67300 High Tensile Brass Hollow Rods

Looking for something close to C67300 hollow bar?

Request a Quote

Product Grades



Request a Quote

We respect your privacy.