Brass Hollow Rods

CZ135 Brass Hollow Rods Manufacturer and Supplier

Get a Quick Quote
Grade
BS CZ135
EN Equivalent
EN CW713R
Material
CuZn37Mn3Al2PbSi
Copper (Cu)
57.0 to 59.0%
Temper
R540

CZ135 brass hollow rods are chosen for precision components which need to be not only strong, but also wear resistant, with machinability at about half that of free cutting brass. This special brass is a British Standard designation for CW713R (CuZn37Mn3Al2PbSi), a brass with a number of additions that enhance its performance in a demanding sliding application. The hollow rod configuration is used for producing cylinder internal surfaces with accurately machined internal surfaces, such as bearing sleeves, valve guides, bushes, etc. USA Piping Solution provides the CZ135 Brass Hollow Rods in sizes confirmed against your drawing, with heat traceability and EN 10204 3.1 mill test certificates.

Specifications of Cz135 Brass Hollow Rods

Parameter / Feature Specification Details
Product Name CZ135 Brass Hollow Rod
Material / Alloy BS CZ135 / EN CW713R / CuZn37Mn3Al2PbSi (Cu 57.0 to 59.0%, Mn 1.5 to 3.0%, Al 1.3 to 2.3%, Si 0.3 to 1.3%, Pb 0.2 to 0.8%, Zn Remainder)
Alloy Type Wrought Special Copper Zinc Alloy / High Tensile Brass (Non Ferrous)
Manufacturing Technique Extruded / Cold Drawn Seamless Hollow Bar
Standards BS CZ135 (legacy designation) | EN 12164 (solid bar reference) | EN 12168 (hollow rod for machining)
Temper R540
Surface Finish and Color Mill Finish / Extruded / Turned | Golden Yellow
Applications Bushings, Slide Bearings, Valve Guides, Valve Stems, Worm Gears, Wear Plates, Marine Pump Hardware
Certification and Packaging EN 10204 3.1 Mill Test Certificate with heat traceability; strapped bundles or wooden crates (US dispatch)

Applications and Industrial Uses of Cz135 Brass Hollow Rods

  1. Industrial Gearbox Manufacturing
  2. Hydraulic Cylinder Manufacturing
  3. Valve and Pump Manufacturing
  4. Marine Equipment Manufacturing
  5. Construction Machinery Manufacturing
  6. Agricultural Equipment Manufacturing
  7. Bearing and Bushing Manufacturing
  8. General Engineering and Precision Machining

Frequently Asked Questions

1. What are CZ135 brass hollow rods used for?

CZ135 brass hollow rods are used to manufacture bushings, bearing sleeves, valve guides and other precision-machined components.

2. Is CZ135 brass equivalent to CW713R?

CZ135 is the legacy British Standard designation associated with CW713R (CuZn37Mn3Al2PbSi). Some suppliers also cross-reference it to ASTM C67400, but C67400 has different chemistry and contains no manganese. Confirm the grade on your drawing before ordering.

3. What makes CZ135 brass suitable for manufacturing bushings?

Its manganese, aluminium and silicon additions provide high strength and resistance to sliding wear, making it suitable for heavy-duty bearing and bushing components.

4. Is CZ135 brass resistant to wear and galling?

Yes, CZ135 brass offers good resistance to sliding wear, galling and surface scoring.

5. What industries use CZ135 brass hollow rods?

They are used in gearboxes, hydraulic equipment, valves and pumps, marine equipment and general precision machining.

6. Why does my drawing say CZ135 and not CW713R?

CZ135 is the older British Standard name, while CW713R is the current European designation for the same alloy. We match the chemical composition and mechanical requirements on your drawing and quote against either name.

7. How does CZ135 differ from C67400?

C67400 contains approximately 57 to 60% copper and 0.5 to 2.0% aluminium, with no manganese. CZ135 (CW713R) contains 1.5 to 3.0% manganese, 1.3 to 2.3% aluminium and 0.3 to 1.3% silicon. The two grades are not interchangeable without checking the drawing.

8. What hollow rod sizes are available?

We supply CZ135 hollow rods in extruded or cold-drawn forms, with outside diameter, bore size and length confirmed against your drawing. Share your OD, bore, length and quantity requirements to confirm availability.

Product Grades



Request a Quote

We respect your privacy.