DIN 2391 St45 Precision Tubes

DIN 2391 St45 Seamless Precision Tubes | ST45 Pipe Supplier USA | E255

Get a Quick Quote
Standard
DIN 2391 / EN 10305-1
Werkstoff
1.0408
EN
E255
Type
Seamless, cold drawn

ST45 tubes are seamless precision steel tubes made to DIN 2391. The ST45 tube is a cold-drawn carbon steel tube with close tolerances on the outside diameter and the wall thickness. The ST45 pipe has a chemical composition of carbon, silicon, manganese, phosphorus and sulfur, and the carbon is kept to 0.21% maximum. The ST45 seamless tube is stronger than St35 and lighter in strength than St52. In the normalized NBK condition these tubes have a minimum yield strength of 255 MPa and a tensile strength of 440 to 570 MPa. The DIN 2391 St45 tube is now also sold as grade E255 under EN 10305-1. ST45 tubes are used in machine parts, automotive components, hydraulic and pneumatic cylinders, sleeves, bushings, etc. The nearest ASTM equivalent of the ST45 tube is ASTM A519 Grade 1020 cold-drawn tubing. USA Piping Solution is a supplier of DIN 2391 ST45 pipe and tube in the USA. We supply these tubes in all five delivery conditions with mill test certificates. Other grades are on the Cold Drawn Seamless Mechanical Tubing page.

Send Us Your ST45 Tube Size and Condition →

ST45 Delivery Conditions (BK, BKW, BKS, GBK, NBK)

The strength of the ST45 tube depends on the delivery condition. The same steel is hard after cold drawing and soft after annealing. The condition code must be given on every order.

Code

Condition

Tensile strength (min)

Yield strength (min)

Elongation (min)

Used for

BK

Cold drawn, no heat treatment

580 MPa (84 ksi)

Not specified

5%

Parts that need the highest strength and no forming

BKW

Cold drawn, light final pass

520 MPa (75 ksi)

Not specified

8%

Parts with light bending or flaring

BKS

Cold drawn and stress relieved

520 MPa (75 ksi)

375 MPa (54 ksi)

12%

Machined parts that must stay straight

GBK

Annealed

390 MPa (57 ksi)

Not specified

21%

Tubes for heavy bending and forming

NBK

Normalized

440 to 570 MPa (64 to 83 ksi)

255 MPa (37 ksi)

21%

Hydraulic lines and general use

The newer EN 10305-1 standard uses different codes for the same conditions: +C for BK, +LC for BKW, +SR for BKS, +A for GBK and +N for NBK.

Applications

  • Machine parts: shafts, sleeves, spacers, bushings and rollers machined from tube.
  • Automotive components: steering, suspension and drive parts.
  • Hydraulic and pneumatic cylinders: cylinder barrels and piston rods in the BKS condition.
  • Hydraulic lines: pressure lines in the NBK condition.
  • Spare parts for German-built machinery: replacement tubes in the original metric size and grade.

Testing & Documentation

ST45 tubes are supplied with a mill test certificate to EN 10204 3.1. The certificate shows the heat number, chemical analysis, delivery condition and tensile results. The tubes are checked for dimensions and surface finish. Flattening or expanding tests and non-destructive leak testing are done as per the standard. Our Quality Policy page explains how incoming material is checked.

Frequently Asked Questions

1. What is ST45 steel tube?

ST45 is a seamless cold-drawn precision steel tube made to DIN 2391. The Werkstoff number is 1.0408 and the current EN name is E255.

2. What is the ASTM equivalent of DIN 2391 St45?

There is no identical grade. ASTM A519 Grade 1020 cold-drawn tubing is the nearest by chemistry. The sizes and tolerances are different because US tubing is made in inches.

3. What is the difference between BK and NBK in ST45 tubes?

BK is the tube as cold drawn, with a tensile strength of 580 MPa minimum and low elongation. NBK is the tube after normalizing, with a tensile strength of 440 to 570 MPa and 21% elongation. NBK tubes can be bent and flared. BK tubes cannot.

4. Is ST45 the same as E255?

Yes. E255 is the name of the same steel in EN 10305-1, which replaced DIN 2391.

5. What is the difference between St45 and St45.8?

St45 is a precision tube to DIN 2391. St45.8 is a boiler tube to DIN 17175 for elevated temperature service. The two are not interchangeable.

Product Grades



Request a Quote

We respect your privacy.