Lean duplex UNS S32304 welded pipes and tubes are duplex stainless steel products with low molybdenum. The UNS S32304 welded pipe has a chemical composition of 21.5 to 24.5% chromium, 3 to 5.5% nickel and 0.05 to 0.20% nitrogen. The duplex 2304 welded tube has a minimum yield strength of 58 ksi, which is more than twice that of 316L. The corrosion resistance of the S32304 pipe is about the same as 316L in most service. The lean duplex 2304 pipe also resists chloride stress corrosion cracking much better than 304L and 316L. The low nickel and molybdenum content keeps the cost of the alloy lower and more stable. UNS S32304 welded pipes and tubes are used in storage tanks, pulp and paper plants, water treatment plants, bridges, structural members, etc. USA Piping Solution is a supplier of lean duplex UNS S32304 welded pipes and tubes in the USA. We supply these products with mill test certificates. The duplex family is explained in our What Are Duplex Steel Pipes? guide.
Duplex 2304 vs 316L
|
Point |
Duplex 2304 (S32304) |
316L (S31603) |
|---|---|---|
|
Yield strength (min) |
58 ksi (400 MPa) |
25 ksi (170 MPa) |
|
Tensile strength (min) |
87 ksi (600 MPa) |
70 ksi (485 MPa) |
|
Nickel |
3.0 to 5.5% |
10 to 14% |
|
Molybdenum |
0.05 to 0.60% |
2 to 3% |
|
PREN (typical) |
About 26 |
About 24 |
|
Chloride stress corrosion cracking |
Resistant |
Can crack |
|
Magnetic |
Yes |
No |
The higher strength of 2304 allows a thinner wall for the same pressure or load. This saves weight and material. The austenitic grade is on the Stainless Steel 316 Welded Pipes & Tubes page.
Testing & Documentation
UNS S32304 welded pipes and tubes are supplied with a mill test certificate. The certificate shows the heat number, chemical analysis, tensile results and hardness. Each length is hydrostatically tested or tested by a non-destructive electric test. The weld is tested by flattening or bend tests as per the standard. Our Quality Policy page explains how incoming material is checked.
Related Products
Lean Duplex UNS S32101 Welded Pipe & Tube · Duplex 2205 Welded Tubes · Stainless Steel 316 Welded Pipes & Tubes
Frequently Asked Questions
1. What is lean duplex stainless steel?
Lean duplex is a duplex stainless steel with low nickel and little or no molybdenum. It has the strength of duplex steel at a lower alloy cost.
2. What is UNS S32304?
UNS S32304 is lean duplex grade 2304, with about 23% chromium and 4% nickel. Its European number is 1.4362.
3. Can duplex 2304 replace 316L?
In most service, yes, with the approval of the responsible engineer. The corrosion resistance is similar and the strength is more than double.
4. What is the difference between 2304 and 2205?
2205 has about 3% molybdenum and resists pitting better. 2304 has almost no molybdenum and costs less.