Stainless steel 316L seamless pipes and tubes are low-carbon austenitic steel products with molybdenum. The SS 316L seamless pipe has a chemical composition of 16 to 18% chromium, 10 to 14% nickel and 2 to 3% molybdenum, and the carbon is kept to 0.035% maximum. The molybdenum gives the 316L seamless tube better resistance to chlorides and acids than 304L. The low carbon keeps the corrosion resistance of the TP316L pipe after welding. The 316L stainless steel pipe has a minimum tensile strength of 70 ksi and a minimum yield strength of 25 ksi. SS 316L seamless pipes and tubes are used in chemical plants, offshore platforms, pharmaceutical plants, food plants, instrumentation lines, etc. USA Piping Solution is a supplier of stainless steel 316L seamless pipe and tube in the USA. We supply these products with mill test certificates.
316 vs 316L and Dual Certification
|
Point |
316 |
316L |
|---|---|---|
|
UNS |
S31600 |
S31603 |
|
Carbon (max) |
0.08% |
0.035% |
|
Tensile / yield (min) |
75 ksi / 30 ksi |
70 ksi / 25 ksi |
|
After welding |
Can sensitize in thick sections |
Resists sensitization |
Most seamless pipe and tube is stamped 316/316L. This dual certified material has the low carbon of 316L and the higher strength of 316, so it meets both callouts. The standard grade is on the Stainless Steel 316 Seamless Pipe & Tube page.
Corrosion Resistance
SS 316L resists pitting and crevice corrosion in chloride service better than 304L. It can still pit in warm seawater and in strong chloride solutions. Service that is too severe for 316L normally moves to a grade with more molybdenum, such as SS 317L Seamless Pipe & Tube.
Testing & Documentation
SS 316L seamless pipes and tubes are supplied with a mill test certificate. The certificate shows the heat number, chemical analysis and tensile results. Each length is hydrostatically tested or tested by a non-destructive electric test. An intergranular corrosion test can be done on request. Our Quality Policy page explains how incoming material is checked.
Related Products
Stainless Steel 316 Seamless Pipe & Tube · 316H Stainless Steel Seamless Pipe · Stainless Steel 316Ti Seamless Tubes · Stainless Steel 316 Flanges
Frequently Asked Questions
1. What is the difference between 316 and 316L stainless steel?
316L has a lower carbon content, 0.035% maximum against 0.08% for 316. The low carbon keeps the corrosion resistance after welding.
2. What does dual certified 316/316L mean?
The material meets the chemistry of 316L and the strength of 316, so it can be used for either callout.
3. Is 316L better than 304L?
316L has 2 to 3% molybdenum, which gives better resistance to chlorides and acids. 304L costs less and is enough for mild service.
4. Is 316L pipe magnetic?
Annealed 316L is not magnetic. It can become slightly magnetic after heavy cold working.