ST37 Steel Pipe

ST37 Steel Pipe Supplier USA | DIN 1629 St37.0 | St37-2 / S235JR

Get a Quick Quote
Standards
DIN 1629 / DIN 1626 / DIN 17100
Werkstoff
1.0254 / 1.0037 / 1.0038
EN
P235TR1 / S235JR
Type
Seamless & Welded

ST37 pipes are low-carbon steel pipes made to German DIN standards. The ST37 steel pipe has a simple chemical composition of carbon, phosphorus and sulfur, and the carbon is kept to 0.17% maximum. The ST37 seamless pipe is made to DIN 1629 in grade St37.0. The ST37 welded pipe is made to DIN 1626 in the same grade. These pipes have a minimum yield strength of 235 MPa and a tensile strength of 350 to 480 MPa. ST37 pipe is easy to weld, bend and machine because of the low carbon content. St37-2 is the structural grade under DIN 17100 and it is now sold as S235JR. ST37 pipes are widely used in machinery, general pipework, pressure vessels, steel structures, construction, etc. The nearest ASTM equivalent of ST37 pipe is ASTM A53 for pressure service and ASTM A36 for structural use. USA Piping Solution is a supplier of ST37 steel pipe in the USA. We supply these pipes in full lengths and cut lengths with mill test certificates. The full carbon range is on the Carbon Steel Pipes & Tubes page.

Send Us Your Drawing Callout for a Quote →

Which ST37 Is on Your Drawing?

The table below shows every ST37 designation used in the DIN standards. The Werkstoff number is the most reliable way to identify the ST37 grade on a drawing.

Callout

Werkstoff

DIN Standard

What It Is

Current EN Grade

St37.0

1.0254

DIN 1629

Seamless circular pipe for pipework, vessels and equipment

P235TR1 to EN 10216-1

St37.0

1.0254

DIN 1626

Welded circular pipe, same grade and service

P235TR1 to EN 10217-1

St37.4

1.0255

DIN 1630

Seamless pipe with tighter quality requirements

P235TR2 to EN 10216-1

St37-2

1.0037

DIN 17100

General structural steel, including hollow sections

S235JR to EN 10025-2

RSt37-2

1.0038

DIN 17100

Killed version of St37-2

S235JR (1.0038)

St37-3

1.0116

DIN 17100

Structural steel with low-temperature impact testing

S235J2 to EN 10025-2

ST37 with a condition code like BK, NBK or GBK is cold-drawn precision tube and not pipe. This product is covered on the ST37 Seamless Tubes page.

Product Forms

  • Seamless pipe, St37.0 to DIN 1629: hot-finished pipe for pipework, vessels and general mechanical use. Quoted from this page.
  • Welded pipe, St37.0 to DIN 1626: for larger diameters and lower-cost runs. Details on our ST37 Welded Tubes page.
  • Structural hollow sections, St37-2 / S235JRH: round, square and rectangular. Quoted from this page.
  • Cold-drawn precision tube: tight tolerances and condition codes BK, NBK, GBK. Details on our ST37 Seamless Tubes page.

Applications

  • Replacement pipework on German-built machinery: presses, packaging lines, printing and plastics equipment specified in DIN grades.
  • General pipework and vessels: water, air, oil and low-pressure steam lines within the 300°C limit.
  • Structural and mechanical fabrication: frames, supports, columns, rollers and conveyor components.
  • Export projects: fabrication in the US for plants abroad that are designed to DIN or EN standards.

What to Put on Your Purchase Order

An incomplete callout can delay an ST37 pipe order. The purchase order should carry these five items:

  • The full designation with suffix (St37.0, St37-2, St37-3) or the Werkstoff number.
  • The standard and whether the pipe is seamless or welded.
  • Outside diameter and wall thickness in millimeters, plus length.
  • Whether the current EN grade (for example P235TR1 or S235JR) is acceptable in place of the DIN grade.
  • The certificate type: EN 10204 2.2, 3.1 or 3.2.

Testing & Documentation

ST37 pipes are supplied with a mill test certificate to EN 10204. The certificate shows the heat number, chemical analysis and tensile results. Dual DIN and EN certification is given where the mill offers it. Hydrostatic or non-destructive leak testing is done as per the ordered standard. Third-party inspection can be arranged before shipment. Our Quality Policy page explains how incoming material is checked.

Frequently Asked Questions

1. What is the ASTM equivalent of ST37 steel pipe?

There is no identical grade. For pressure pipe, ASTM A53 Grade A is the closest by strength and A53 Grade B or A106 Grade B is the usual stronger substitute. For structural use, ASTM A36 and A500 Grade A are the nearest. The equivalent table above gives the strength figures.

2. Is ST37 the same as S235JR?

St37-2 from DIN 17100 was replaced by S235JR in EN 10025, and the two are treated as the same grade. St37.0 pipe is a different designation and was replaced by P235TR1.

3. What does the 37 in ST37 mean?

It is the minimum tensile strength in the old unit, 37 kgf/mm², which is about 360 MPa or 52 ksi. “St” stands for Stahl, the German word for steel.

4. What is the difference between St37.0 and St37-2?

St37.0 is a pipe grade from DIN 1629 and DIN 1626, tested and certified as pipe. St37-2 is a general structural steel from DIN 17100 used for sections, plate and hollow sections. Strength is nearly the same; the testing and intended use are not.

5. Can ST37 pipe be used on ASME B31.3 piping?

Not as a listed material. It would have to be qualified as an unlisted material under the code, which is the owner’s and engineer’s decision. For new US code piping, A53 or A106 is normally specified instead.

6. Are DIN 1629 and DIN 17100 still current standards?

No. Both are withdrawn. DIN 1629 was replaced by EN 10216-1 and DIN 17100 by EN 10025. Mills still produce and certify to the old designations on request, often with dual certification.

Product Grades



Request a Quote

We respect your privacy.