Stainless steel 304H seamless pipes and tubes are austenitic chromium-nickel steel products for high-temperature service. The SS 304H seamless pipe has a chemical composition of 18 to 20% chromium and 8 to 11% nickel, and the carbon is controlled between 0.04 and 0.10%. This higher carbon gives the 304H seamless tube better strength at temperatures above 1000°F (538°C) than 304 or 304L. The TP304H pipe has a minimum tensile strength of 75 ksi and a minimum yield strength of 30 ksi. The 304H stainless steel pipe is made to ASTM A312 and the tube is made to ASTM A213. SS 304H seamless pipes and tubes are used in boilers, superheaters, refinery heaters, steam lines, heat exchangers, etc. USA Piping Solution is a supplier of stainless steel 304H seamless pipe and tube in the USA. We supply these products with mill test certificates. Other grades are on the Stainless Steel Seamless Pipes & Tubes page.
304 vs 304L vs 304H
The three grades have the same chromium and nickel. The carbon content is different.
|
Point |
304 |
304L |
304H |
|---|---|---|---|
|
UNS |
S30400 |
S30403 |
S30409 |
|
Carbon |
0.08% max |
0.035% max |
0.04 to 0.10% |
|
Tensile / yield (min) |
75 ksi / 30 ksi |
70 ksi / 25 ksi |
75 ksi / 30 ksi |
|
Grain size requirement |
None |
None |
ASTM No. 7 or coarser |
|
Best use |
General service |
Welded parts in corrosive service |
Service above 1000°F (538°C) |
The general grade is on the Stainless Steel 304 Seamless Pipe & Tube page and the low-carbon grade is on the Stainless Steel 304L Seamless Pipe & Tube page. Super 304H is a different alloy with copper and niobium, and it is on the Super 304H Pipes & Tubes page.
Welding and Sensitization
The higher carbon of 304H can form chromium carbides in the heat affected zone of a weld. This lowers the corrosion resistance in wet corrosive service. For this reason 304H is used for hot, dry service, and 304L is used for wet corrosive service.
Testing & Documentation
SS 304H seamless pipes and tubes are supplied with a mill test certificate. The certificate shows the heat number, chemical analysis, tensile results and grain size. Each length is hydrostatically tested or tested by a non-destructive electric test. Our Quality Policy page explains how incoming material is checked.
Related Products
Stainless Steel 304 Seamless Pipe & Tube · Stainless Steel 304L Seamless Pipe & Tube · Stainless Steel 304 Flanges · Stainless Steel Seamless Pipes & Tubes
Frequently Asked Questions
1. What is the difference between 304 and 304H stainless steel?
304H has a controlled carbon content of 0.04 to 0.10% and a grain size requirement. This gives it better strength above 1000°F. 304 has a carbon limit of 0.08% maximum with no minimum.
2. What does the H in 304H mean?
H means high carbon. The grade is made for high-temperature service.
3. Can 304H pipe be dual certified as 304?
Yes. A 304H pipe with carbon between 0.04 and 0.08% also meets the 304 chemistry, and mills often certify it to both.
4. Is 304H the same as Super 304H?
No. Super 304H (UNS S30432) has added copper, niobium and nitrogen and is a different alloy.