ASTM A671 CC65 EFW Pipe

ASTM A671 CC65 EFW Pipe Supplier USA | LTCS Pipe from A516 Grade 65

Get a Quick Quote
Standard
ASTM A671
Grade
CC65
Plate
ASTM A516 Grade 65
Type
Electric fusion welded

ASTM A671 CC65 pipes are electric fusion welded carbon steel pipes made from ASTM A516 Grade 65 plate. The A671 CC65 pipe is the most ordered grade of the A671 standard for low-temperature service. The A671 CC65 EFW pipe has a chemical composition of carbon, manganese, silicon, phosphorus and sulfur. The plate has a tensile strength of 65 to 85 ksi and a minimum yield strength of 35 ksi. The A671 Gr CC65 pipe is supplied mostly in Class 22 and Class 32, with impact testing when ordered. A671 CC65 LTCS pipes are used in LNG plants, gas processing plants, cold process lines, flare lines, etc. USA Piping Solution is a supplier of ASTM A671 CC65 EFW pipe in the USA. We supply these pipes with mill test certificates, plate certificates and radiography reports. The other grades are on the ASTM A671 EFW Pipe page.

Send Us Your A671 CC65 Pipe Size and Class →

A671 CC65 for Low-Temperature Service

A671 CC65 pipe is used as low-temperature carbon steel pipe in large diameters. A516 plate is a fine grain steel and it keeps good toughness when it is normalized. The impact test is a supplementary requirement of ASTM A671, so the test and the test temperature must be written on the order. In small diameters the same duty is done by seamless ASTM A333 Grade 6 Pipe. The matching flanges are on the ASTM A350 LF2 Flanges page.

A671 CC65 Class 22 vs Class 32

Point

Class 22

Class 32

Heat treatment of pipe

Stress relieved

Normalized

Radiography of weld

Full

Full

Pressure test

Yes

Yes

Typical use

General low-temperature lines

Lines that need better toughness in the weld and the plate

The other classes are explained on the ASTM A671 EFW Pipe page.

What to Put on Your Purchase Order

  • The grade and class, for example A671 CC65 Class 32.
  • The NPS or outside diameter, the wall thickness and the length.
  • The impact test temperature, if an impact test is needed.
  • Any other supplementary requirement, such as a hardness test or NACE limits.
  • The certificate type and third-party inspection, if needed.

Testing & Documentation

A671 CC65 pipes are supplied with a mill test certificate and the A516 Grade 65 plate certificate. Tensile tests are done on the plate and across the weld. Radiography and pressure tests are done as per the class. Impact test results are supplied when ordered. Our Quality Policy page explains how incoming material is checked.

Frequently Asked Questions

1. What is ASTM A671 CC65 pipe?

It is an electric fusion welded pipe made from ASTM A516 Grade 65 plate, for atmospheric and lower temperatures.

2. Is A671 CC65 an LTCS pipe?

A671 CC65 is widely used as low-temperature carbon steel pipe. The impact test is a supplementary requirement and must be ordered with the test temperature.

3. What is the difference between A671 CC65 Class 22 and Class 32?

Class 22 pipe is stress relieved. Class 32 pipe is normalized. Both are fully radiographed and pressure tested.

4. What is the difference between A671 CC65 and A333 Grade 6?

A333 Grade 6 is a seamless or welded low-temperature pipe in standard pipe sizes. A671 CC65 is an EFW pipe made from plate in NPS 16 and over.

Product Grades



Request a Quote

We respect your privacy.