ASTM A671 pipes are electric fusion welded steel pipes for atmospheric and lower temperatures. The A671 EFW pipe is made from pressure vessel quality plate, and the plate is rolled and welded with filler metal. ASTM A671 pipe is supplied in sizes of NPS 16 and over, with wall thickness up to 3 in. The A671 pipe is ordered by grade and by class. The grade shows the plate used and the class shows the heat treatment and the testing. The common A671 grades are CC60, CC65, CC70, CD70 and CF70. ASTM A671 EFW pipes are used in LNG plants, gas processing plants, refineries, low-temperature process lines, etc. USA Piping Solution is a supplier of ASTM A671 EFW pipe in the USA. We supply these pipes with mill test certificates and radiography reports. Other welded grades are on the Carbon Steel Welded Pipes & Tubes page.
How to Read an A671 Callout
An A671 pipe is written as a grade and a class, for example A671 CC65 Class 22.
- CC65 is the grade. It shows that the pipe is made from ASTM A516 Grade 65 plate.
- The first digit of the class (2) shows the heat treatment. Here the pipe is stress relieved.
- The second digit of the class (2) shows the testing. Here the weld is fully radiographed and the pipe is pressure tested.
ASTM A671 Grades and Plate Specifications
|
A671 Grade |
Plate specification |
Type of steel |
Tensile strength of plate |
Grade page |
|---|---|---|---|---|
|
CC60 |
ASTM A516 Grade 60 |
Killed carbon steel, fine grain |
60 to 80 ksi |
|
|
CC65 |
ASTM A516 Grade 65 |
Killed carbon steel, fine grain |
65 to 85 ksi |
|
|
CC70 |
ASTM A516 Grade 70 |
Killed carbon steel, fine grain |
70 to 90 ksi |
|
|
CD70 |
ASTM A537 Class 1 |
Carbon-manganese-silicon steel, normalized |
70 to 90 ksi |
|
|
CF70 |
ASTM A203 Grade B |
2-1/4% nickel steel |
70 to 90 ksi |
The standard also has other grades, such as CA55, CB60, CB65, CB70 and CD80. These are supplied against enquiry.
Manufacture of A671 EFW Pipe
The plate is formed into a cylinder and the seam is welded from both sides with full penetration. Filler metal is added in the weld. The welding procedure and the welders are qualified as per ASME Section IX. The pipe is then heat treated and tested as per the class. EFW pipe is made in large diameters and heavy walls that are not available in seamless pipe. The two types are compared in our Seamless vs Welded Pipe & Tubes Guide.
Applications
- LNG and gas processing plants: low-temperature gas and liquid lines.
- Refineries and petrochemical plants: large-diameter process and flare lines.
- Oil and gas terminals: loading lines and headers.
- Power plants: large-diameter water and low-pressure steam lines.
Testing & Documentation
ASTM A671 pipes are supplied with a mill test certificate and the plate certificates. The certificate shows the heat number, chemical analysis, tensile results of the plate and the weld, and the heat treatment. Radiography reports and pressure test reports are supplied as per the class. Impact test results are supplied when ordered. Third-party inspection can be arranged before shipment. Our Quality Policy page explains how incoming material is checked.
Related Products
ASTM A691 EFW Alloy Steel Pipe · ASTM A333 Grade 6 Pipe · Carbon Steel Welded Pipes & Tubes
Frequently Asked Questions
1. What is ASTM A671 pipe?
ASTM A671 is an electric fusion welded steel pipe made from pressure vessel plate. It is used at atmospheric and lower temperatures in sizes of NPS 16 and over.
2. What does EFW mean?
EFW means electric fusion welded. The plate is rolled into a pipe and the seam is welded with filler metal.
3. What is the difference between A671 and A672 pipe?
A671 pipe is for atmospheric and lower temperatures. A672 pipe is for high-pressure service at moderate temperatures. The two standards use different grade names for the same plate.
4. What does Class 22 mean in A671 pipe?
Class 22 means the pipe is stress relieved, the weld is fully radiographed and the pipe is pressure tested.
5. Which plate is used for A671 CC65 pipe?
A671 CC65 pipe is made from ASTM A516 Grade 65 plate.