ASTM A672 B65 pipes are electric fusion welded carbon steel pipes made from ASTM A515 Grade 65 plate. The A672 B65 pipe is a killed carbon steel pipe for high-pressure service at intermediate and higher temperatures. The A672 Grade B65 EFW pipe has a chemical composition of carbon, manganese, silicon, phosphorus and sulfur. The plate has a tensile strength of 65 to 85 ksi and a minimum yield strength of 35 ksi. The A672 B65 pipe is stronger than B60, so the wall can be thinner at the same pressure. This grade is written as A672 CB65 on some enquiries. A672 B65 pipes are used in steam headers, boiler feed lines, hot process lines, power plant piping, etc. USA Piping Solution is a supplier of ASTM A672 B65 EFW pipe in the USA. We supply these pipes with mill test certificates and plate certificates. The other grades are on the ASTM A672 EFW Pipe page.
B-Series Grades of ASTM A672
The B grades are all made from ASTM A515 plate. The number is the minimum tensile strength in ksi.
|
A672 Grade |
Plate |
Tensile strength |
Yield strength (min) |
Elongation in 2 in. (min) |
|---|---|---|---|---|
|
B55 |
A515 Grade 55 |
55 to 75 ksi (380 to 515 MPa) |
30 ksi (205 MPa) |
27% |
|
B60 |
A515 Grade 60 |
60 to 80 ksi (415 to 550 MPa) |
32 ksi (220 MPa) |
25% |
|
B65 |
A515 Grade 65 |
65 to 85 ksi (450 to 585 MPa) |
35 ksi (240 MPa) |
23% |
|
B70 |
A515 Grade 70 |
70 to 90 ksi (485 to 620 MPa) |
38 ksi (260 MPa) |
21% |
B55 and B70 pipes are supplied against enquiry. The lower grade is on the ASTM A672 B60 EFW Pipe page. The fine grain grade of the same strength is on the ASTM A672 C65 EFW Pipe page.
What to Put on Your Purchase Order
- The grade and class, for example A672 B65 Class 22.
- The NPS or outside diameter, the wall thickness and the length.
- The end finish, plain or beveled.
- Any supplementary requirement, such as a hardness test or ultrasonic test of the plate.
- The certificate type and third-party inspection, if needed.
Testing & Documentation
A672 B65 pipes are supplied with a mill test certificate and the A515 Grade 65 plate certificate. Tensile tests are done on the plate and across the weld. Radiography and pressure tests are done as per the class. Our Quality Policy page explains how incoming material is checked.
Frequently Asked Questions
1. What is ASTM A672 B65 pipe?
It is an electric fusion welded carbon steel pipe made from ASTM A515 Grade 65 plate, for high-pressure service.
2. Is A672 CB65 the same as A672 B65?
The correct A672 name is B65. CB65 is the name of the matching grade in ASTM A671. Both are made from A515 Grade 65 plate.
3. What is the difference between A672 B60 and B65?
B65 is stronger. The plate tensile strength is 65 to 85 ksi for B65 and 60 to 80 ksi for B60.
4. What is the difference between A672 B65 and C65?
B65 is made from A515 plate for higher temperature service. C65 is made from fine grain A516 plate with better toughness. The strength is the same.