ASTM A672 pipes are electric fusion welded steel pipes for high-pressure service at moderate temperatures. The A672 EFW pipe is made from pressure vessel quality plate, and the seam is welded with filler metal. ASTM A672 pipe is supplied in sizes of NPS 16 and over, with wall thickness up to 3 in. The A672 pipe is ordered by grade and by class. The common A672 grades are A55, B60, B65, C60, C65 and C70. The class shows the heat treatment and the testing of the pipe. ASTM A672 EFW pipes are used in refineries, petrochemical plants, power plants, gas plants, steam and process headers, etc. USA Piping Solution is a supplier of ASTM A672 EFW pipe in the USA. We supply these pipes with mill test certificates, plate certificates and radiography reports.
ASTM A672 Grade Names
An A672 grade is one letter and a number, for example A672 C65. The letter shows the plate specification and the number shows the minimum tensile strength of the plate in ksi. Enquiries sometimes show these grades as CA55, CB60 or CC65. Those two-letter names are ASTM A671 names. The correct A672 names are A55, B60 and C65.
|
A672 Grade |
Plate specification |
Type of steel |
Grade page |
|---|---|---|---|
|
A55 |
ASTM A285 Grade C |
Plain carbon steel |
|
|
B60 |
ASTM A515 Grade 60 |
Killed carbon steel for intermediate and higher temperature |
|
|
B65 |
ASTM A515 Grade 65 |
Killed carbon steel for intermediate and higher temperature |
|
|
C60 |
ASTM A516 Grade 60 |
Killed fine grain carbon steel |
|
|
C65 |
ASTM A516 Grade 65 |
Killed fine grain carbon steel |
|
|
C70 |
ASTM A516 Grade 70 |
Killed fine grain carbon steel |
The standard also has other grades, such as A45, A50, B55, B70, C55, D70 and D80. These are supplied against enquiry.
Applications
- Refineries and petrochemical plants: large-diameter process lines and headers.
- Power plants: feed water, steam and circulating water lines.
- Gas plants and compressor stations: high-pressure headers and station piping.
- Chemical and fertilizer plants: process and utility lines.
Testing & Documentation
ASTM A672 pipes are supplied with a mill test certificate and the plate certificates. The certificate shows the heat number, chemical analysis, tensile results of the plate and the weld, and the heat treatment. Radiography reports and pressure test reports are supplied as per the class. Third-party inspection can be arranged before shipment. Our Quality Policy page explains how incoming material is checked.
Frequently Asked Questions
1. What is ASTM A672 pipe?
ASTM A672 is an electric fusion welded steel pipe made from pressure vessel plate, for high-pressure service at moderate temperatures, in sizes of NPS 16 and over.
2. What is the difference between A672 C65 and A671 CC65?
Both are made from ASTM A516 Grade 65 plate. A672 C65 is ordered for high-pressure service at moderate temperatures. A671 CC65 is ordered for atmospheric and lower temperatures.
3. Is there an A672 CC65 grade?
No. CC65 is an A671 name. The A672 grade made from the same plate is C65.
4. What does Class 22 mean in A672 pipe?
Class 22 means the pipe is stress relieved, the weld is fully radiographed and the pipe is pressure tested.
5. What do the letters A, B and C mean in A672 grades?
The letter shows the plate. A grades use A285 plate, B grades use A515 plate and C grades use A516 plate.