ASTM A106 Grade C Pipe

ASTM A106 Grade C Seamless Pipe Supplier USA | ASME SA106 Gr C

Get a Quick Quote
Standard
ASTM A106 / ASME SA106
Grade
C
Type
Seamless carbon steel pipe
Sizes
NPS 1/8 to NPS 48

ASTM A106 Grade C pipes are seamless carbon steel pipes for high-temperature service. The A106 Grade C pipe is the strongest of the three grades in the ASTM A106 standard. The A106 Gr C pipe has a chemical composition of carbon, manganese, silicon, phosphorus and sulfur, and the carbon is kept to 0.35% maximum. These pipes have a minimum tensile strength of 70 ksi (485 MPa) and a minimum yield strength of 40 ksi (275 MPa). The higher strength of the SA106 Grade C pipe allows a thinner wall than Grade B at the same pressure. The ASTM A106 Grade C seamless pipe can be bent, flanged and welded. A106 Grade C pipes are used in power plants, boilers, steam lines, feed water lines, refineries, etc. USA Piping Solution is a supplier of ASTM A106 Grade C pipe in the USA. We supply these pipes in full lengths and cut lengths with mill test certificates. Other seamless grades are on the Carbon Steel Seamless Pipes & Tubes page.

Send Us Your A106 Grade C Pipe Requirement →

A106 Grade A vs Grade B vs Grade C

The three grades of ASTM A106 differ in carbon content and strength. The table below shows the difference.

Property

Grade A

Grade B

Grade C

Tensile strength (min)

48 ksi (330 MPa)

60 ksi (415 MPa)

70 ksi (485 MPa)

Yield strength (min)

30 ksi (205 MPa)

35 ksi (240 MPa)

40 ksi (275 MPa)

Carbon (max)

0.25%

0.30%

0.35%

Manganese

0.27 to 0.93%

0.29 to 1.06%

0.29 to 1.06%

ASME welding group

P-No. 1, Group 1

P-No. 1, Group 1

P-No. 1, Group 2

Grade B is the common grade for general piping and it is on the ASTM A106 Grade B Pipe page.

Why A106 Grade C Is Used in Place of Grade B

The allowable stress of a pipe in the ASME codes is based on its strength. The A106 Grade C pipe has a tensile strength of 70 ksi and Grade B has 60 ksi. Under ASME B31.3 the basic allowable stress at ambient temperature is 23.3 ksi for Grade C and 20.0 ksi for Grade B. This is about 16% higher for Grade C. A higher allowable stress gives a thinner wall for the same pressure. A thinner wall means less weight, less weld metal and a larger bore. For this reason A106 Grade C pipe is mostly used in large, heavy-wall, high-pressure lines such as boiler feed water lines and steam headers. The allowable stress at the design temperature must be taken from the code edition used for the project.

Temperature Limits of A106 Grade C Pipe

A106 Grade C pipe is made for high-temperature service. Carbon steel can lose strength by graphitization after long service above about 800°F (427°C). Lines that work above this temperature for a long time normally use an alloy grade, and these are on the Chrome Moly Pipes & Tubes page. A106 Grade C is not impact tested for low temperature. Low-temperature lines use a grade such as ASTM A333 Grade 6 Pipe.

Applications

  • Power plants: boiler feed water lines, main steam lines and headers. Related tubes are on the Boiler Tubes & Pipes page.
  • Boilers: downcomers, risers and connecting pipework.
  • Refineries and petrochemical plants: high-pressure process lines and heater piping.
  • Oil and gas: high-pressure station piping.
  • Pressure vessels: nozzles and shells made from pipe.

Testing & Documentation

A106 Grade C pipes are supplied with a mill test certificate. The certificate shows the heat number, chemical analysis and tensile results. Each pipe is hydrostatically tested or tested by a non-destructive electric test as per ASTM A106. Bend tests or flattening tests are done as per the standard. Third-party inspection can be arranged before shipment. Our Quality Policy page explains how incoming material is checked.

Frequently Asked Questions

1. What is ASTM A106 Grade C pipe?

ASTM A106 Grade C is a seamless carbon steel pipe for high-temperature service. It has a minimum tensile strength of 70 ksi and a minimum yield strength of 40 ksi.

2. What is the difference between A106 Grade B and Grade C?

Grade C is stronger. The minimum tensile strength is 70 ksi for Grade C and 60 ksi for Grade B. The maximum carbon is 0.35% for Grade C and 0.30% for Grade B.

3. Can A106 Grade C pipe be welded?

Yes. A106 Grade C is a P-No. 1 Group 2 material in ASME Section IX. The higher carbon content means the preheat in the welding procedure must be followed, mainly on heavy walls.

4. Is A106 Grade C the same as SA106 Grade C?

SA106 is the ASME version of ASTM A106. The material is the same. SA106 pipe is ordered for ASME code boilers and pressure vessels.

5. Is A106 Grade C a pipe or a tube?

A106 covers pipe only, in NPS sizes. The boiler tube with the same strength is ASTM A210 Grade C.

6. What is the maximum temperature for A106 Grade C pipe?

The limit depends on the design code. Carbon steel can graphitize after long service above about 800°F (427°C), so alloy steel pipe is normally used above this temperature.

Product Grades



Request a Quote

We respect your privacy.