ASTM A672 C60 pipes are electric fusion welded carbon steel pipes for high-pressure service at moderate temperatures. The A672 C60 pipe is made from ASTM A516 Grade 60 plate, a killed fine grain steel. The A672 C60 EFW pipe has a chemical composition of carbon, manganese, silicon, phosphorus and sulfur. The plate has a tensile strength of 60 to 80 ksi and a minimum yield strength of 32 ksi. The A672 Gr C60 pipe is the lowest-carbon grade of the common C series, so it is the easiest of them to weld. This grade is written as A672 CC60 on some enquiries. A672 C60 pipes are used in refinery process lines, gas plant headers, water injection lines, utility headers, etc. USA Piping Solution is a supplier of ASTM A672 C60 EFW pipe in the USA. We supply these pipes with mill test certificates and plate certificates. The other grades are on the ASTM A672 EFW Pipe page.
A672 C60 vs A671 CC60
The two pipes are made from the same plate by the same method. The standard on the order is different, and the standard must match the line class of the project.
|
Point |
A672 C60 |
A671 CC60 |
|---|---|---|
|
Plate |
A516 Grade 60 |
A516 Grade 60 |
|
Standard written for |
High pressure at moderate temperatures |
Atmospheric and lower temperatures |
|
Usual extra test |
None |
Impact test at low temperature |
|
Typical line |
Process and utility headers |
Cold process and gas lines |
The low-temperature pipe is on the ASTM A671 CC60 EFW Pipe page.
Testing & Documentation
A672 C60 pipes are supplied with a mill test certificate and the A516 Grade 60 plate certificate. Tensile tests are done on the plate and across the weld. Radiography and pressure tests are done as per the class. Our Quality Policy page explains how incoming material is checked.
Frequently Asked Questions
1. What is ASTM A672 C60 pipe?
It is an electric fusion welded carbon steel pipe made from ASTM A516 Grade 60 plate, for high-pressure service at moderate temperatures.
2. Is A672 CC60 the same as A672 C60?
The correct A672 name is C60. CC60 is the name of the grade in ASTM A671 that uses the same plate.
3. Can A671 CC60 be used in place of A672 C60?
The plate is the same, but the two standards are written for different service. The pipe must be certified to the standard named in the project specification.
4. What is the difference between A672 C60 and C65?
C65 is stronger. The plate tensile strength is 65 to 85 ksi for C65 and 60 to 80 ksi for C60.