C67400 high tensile brass hollow bar is extruded hollow bar in UNS C67400, a manganese bronze (also called manganese aluminum bronze) made of about 57 to 60% copper, 2.0 to 3.5% manganese, 0.5 to 2.0% aluminium and 0.5 to 1.5% silicon, with zinc as the remainder and lead held to 0.50% max. Two facts decide whether you should buy it. The SAE J463 minimum tensile strength is 540 MPa (78 ksi) for sections up to 1 in, and the machinability rating is 30, where free cutting brass C36000 is 100. In short, you choose this alloy for strength and wear, not for fast cutting, and the ready made bore saves you the drilling time and scrap on a material that is slow to machine.
At USA Piping Solution we supply c67400 hollow rod as hollow round bar, with hex and square sections on request, in the as extruded or cold drawn condition.
Specification Basis for C67400 Hollow Bar
|
Item |
Statement |
|---|---|
|
Alloy composition |
UNS C67400 limits as in the composition table below |
|
Mechanical minimums |
SAE J463 by section size, for solid extruded and drawn bar |
|
Hollow bar basis |
Confirmed with you at quotation |
|
Certification |
EN 10204 3.1 mill test certificate |
Applications of C67400 High Tensile Brass Hollow Rods
C67400 High Tensile Brass Hollow Rods are used in industrial components that require high strength, wear resistance and durability. Common applications include:
- Bushings and Sleeve Bearings: Used in machinery assemblies to support rotating shafts and withstand friction.
- Valve Seats: Suitable for components requiring strength and resistance to mechanical wear.
- Nuts and Sleeves: Used to manufacture durable machined components for industrial equipment.
- Gears and Cams: Applied in mechanical assemblies requiring strength and dimensional stability.
- Pump Components: Used in selected parts exposed to mechanical stress and wear.
- Industrial Wear Parts: Suitable for manufacturing components requiring reliable service performance.
Looking for C67400 High Tensile Brass Hollow Rods? Contact USA Piping Centre with your required dimensions, specifications and quantity to request a quotation.
Frequently Asked Questions
1. What is C67400?
C67400 is a manganese bronze, also known as manganese aluminium bronze and high tensile brass. It contains copper, manganese, aluminium, silicon and zinc.
2. Is C67400 brass or bronze?
C67400 is commonly called both brass and manganese bronze. Its copper and zinc content makes it brass by composition, while trade usage classifies it as manganese bronze.
3. What is the composition of C67400?
C67400 contains copper 57.00 to 60.00%, manganese 2.00 to 3.50%, aluminium 0.50 to 2.00%, silicon 0.50 to 1.50%, and zinc as the remainder.
4. What is the tensile strength of C67400?
SAE J463 specifies minimum tensile strengths of 540 MPa, 515 MPa and 485 MPa for solid bars up to 1 inch, 1 to 2 inches and 2 to 3 inches, respectively.
5. How machinable is C67400?
C67400 has a machinability rating of 30, compared with free cutting brass C36000 at 100. It requires slower cutting speeds and careful tool selection.
6. What is the difference between C67400 and C67300?
C67400 contains aluminium, has lower lead content and higher strength. C67300 contains more lead and offers better machinability, with ratings of 30 and 70, respectively.
7. What sizes of hollow bar do you supply?
We supply hollow round bars in various outside diameters and bores, with hexagonal and square sections available on request, subject to availability.
8. What is C67400 hollow bar used for?
C67400 hollow bars are used for manufacturing bushings, sleeve bearings, nuts, sleeves, valve seats, gears, cams and other wear resistant industrial components.
Request a Quote for C67400 High Tensile Brass Hollow Bar
Looking for something close to C67400 hollow bar? SeeC67300 High Tensile Brass Hollow Rods for easier machining, ourOther Alloys range for free cutting brass rod and other bronze options