Bronze Hollow Bar

C91700 Leaded Bronze Hollow Bar Manufacturer, Supplier and Exporter

Get a Quick Quote
Grade
UNS C91700
Material
Nickel Gear Bronze
Standard
ASTM B427 / B505
Tin (Sn)
11.30 to 12.50%
Product Form
Continuous Cast Hollow Bar

C91700 leaded bronze hollow bar is hollow bar in UNS C91700, a high tin nickel gear bronze made of 84 to 87% copper, 11.3 to 12.5% tin and 1.2 to 2.0% nickel, with lead held to 0.25% max, made to ASTM B427. This is a casting alloy, and hollow bar is made by continuous casting, which forms the bore as the bar is made. It is chosen for heavy load, lower speed gears, worm wheels and bearings, with a minimum tensile strength of 44 ksi (303 MPa) and a minimum hardness of 85 BHN.

USA Piping Solution is a premier global manufacturer, stockist, and exporter of C91700 bronze hollow bars, supplying continuous cast hollow rounds from the United States with full EN 10204 3.1 mill test certification on every lot.

Request a Quote

Specification Basis for C91700 Leaded Bronze Hollow Bar

Item

Statement

Composition and minimum properties

ASTM B427 for gear bronze alloy castings

Continuous cast bar and tube

ASTM B505, confirmed at quotation

Customer specification

Tell us if your drawing calls one out

Certification

EN 10204 3.1 mill test certificate

Applications of C91700 Leaded Bronze Hollow Bar

C91700 nickel gear bronze bushing stock and gear blanks are the primary uses for this product, combining a ready-made bore with a hard, tough, wear-resistant wall. Common uses include:

  • Gears, gear blanks, worm gears, and worm wheels: Engineered for high-torque power transmission and heavy sliding contact.
  • Heavy-load, low-speed bearings and high-strength bushings: Delivers exceptional load-carrying capacity and anti-galling performance in demanding pivot assemblies.
  • Pump impellers, piston rings, steam fittings, and valve bodies: Provides superior pressure tightness, steam resistance, and durability in fluid-handling equipment.
  • Movable bridge components: Withstands extreme structural loads and environmental wear in heavy civil engineering mechanisms.

Request a Quote

Frequently Asked Questions

1. What is C91700 bronze?

C91700 is a UNS designation for a high tin nickel gear bronze. It contains 84.00 to 87.00% copper, 11.30 to 12.50% tin and 1.20 to 2.00% nickel, with lead held to 0.25% max. We supply it as continuous cast hollow bar.

2. Is C91700 a leaded bronze?

Not in the usual sense. C91700 is a high tin nickel gear bronze with only 0.25% lead max. It is often searched as leaded bronze, and true leaded bronzes such as C93200 carry much more lead and machine more freely.

3. What is the composition of C91700?

Copper 84.00 to 87.00%, tin 11.30 to 12.50%, nickel including cobalt 1.20 to 2.00%, lead 0.25% max, zinc 0.25% max, iron 0.20% max, phosphorus 0.30% max, antimony 0.20% max and sulfur 0.05% max.

4. What is the tensile strength of C91700?

The ASTM B427 minimum tensile strength is 44 ksi (303 MPa), with a minimum yield strength of 22 ksi (152 MPa), a minimum elongation of 16% and a minimum hardness of 85 BHN. We give the actual results for your order on the mill certificate.

5. Which standard covers C91700?

C91700 is a casting alloy covered by ASTM B427 for gear bronze alloy castings. Continuous cast bar and tube is also listed against ASTM B505. We confirm the basis for your hollow bar at quotation.

6. What is the difference between C91700 and C93200?

C93200 is a true leaded tin bronze that machines freely. C91700 is a high tin nickel gear bronze with very low lead, chosen for heavy load gears and worm wheels, and it machines much more slowly.

Request a Custom Quote for C91700 Leaded Bronze Hollow Bars

USA Piping Solution is a premier global manufacturer, stockist, and exporter of C91700 bronze hollow bars, supplying continuous cast hollow rounds from the United States with full EN 10204 3.1 mill test certification on every lot.

Request a Quote

Product Grades



Request a Quote

We respect your privacy.