C95400 aluminium bronze hollow bar is hollow bar in UNS C95400 (aluminum bronze 9C), a copper alloy with 10.0 to 11.5% aluminium and 3.0 to 5.0% iron. According to ASTM B505 the cast alloy is supplied in continuous cast form as hollow bars having a tensile strength of at least 85 ksi (586 MPa) and hardness of 170 BHN typically. That makes it pre bored stock for bushings, bearings, gears, valve guides and seats and marine parts, with no drilling needed. You may also see it written as c95400 aluminum bronze hollow bar, and it is the same alloy.
USA Piping Solution supplies C95400 hollow bar from the United States, as cast or heat treated, with an EN 10204 3.1 mill test certificate with every lot.
Specification of C95400 Aluminium Bronze Hollow Bar
|
Parameter |
Specification / Designation |
|---|---|
|
UNS / CDA |
C95400 |
|
Common Name |
Aluminum Bronze 9C |
|
ASTM |
B505 / B505M (Continuous Cast Bar and Tube); B148 (Sand Castings); B271 (Centrifugal Castings) |
|
SAE |
J461, J462 |
|
Federal & Military |
QQ-C-390 (G5), QQ-B-671 Class 3, MIL-B-16033 Class 3 |
Applications of C95400 Hollow Bar
C95400 aluminum bronze bushing stock is the primary application for this product, combining a preformed bore with a high-strength, wear-resistant wall. Common uses include:
- Bushings, bearings, and bearing segments: Engineered for heavy-load, high-friction industrial machinery and pivot assemblies.
- Sleeves, gear blanks, and worm gears: Delivers exceptional fatigue strength and impact resistance in heavily loaded power transmission systems.
- Valve guides, seats, bodies, and pump parts: Provides superior erosion-corrosion resistance in high-pressure fluid handling equipment.
- Marine hardware, shipbuilding, and landing gear parts: Withstands seawater corrosion and extreme structural stress in aerospace and naval environments.
Need custom-sized C95400 aluminium bronze hollow bars? Contact USA Piping Solution today
Frequently Asked Questions
1. What is C95400 aluminium bronze?
C95400 is a UNS designation for a cast aluminium bronze, also called aluminum bronze 9C. It contains 10.0 to 11.5% aluminium and 3.0 to 5.0% iron, with copper as the balance. We supply it as continuous cast hollow bar.
2. Is C95400 the same as aluminum bronze 9C?
Yes. Aluminum bronze 9C is the common trade name for UNS C95400.
3. What is the composition of C95400?
Copper 83.00% min, aluminium 10.00 to 11.50%, iron 3.00 to 5.00%, nickel including cobalt 1.50% max and manganese 0.50% max.
4. What is the tensile strength of C95400?
The ASTM B505 minimum tensile strength is 85 ksi (586 MPa), with a minimum yield strength of 32 ksi (221 MPa) and a minimum elongation of 12%. We give the actual results for your order on the mill certificate.
5. Which standard covers C95400 hollow bar?
ASTM B505 covers continuous cast copper base alloy bar, hollow bar and shapes, so it is the governing standard for the bar. ASTM B148 and B271 cover sand and centrifugal castings.
6. What is the difference between C95400 and C95200?
C95400 has more aluminium and iron, 10.0 to 11.5% aluminium against 8.5 to 9.5% for C95200, and gives higher strength and hardness. They are different alloys and should not be swapped without checking your drawing.
Request a Custom Quote for C95400 Hollow Bars
USA Piping Solution is a leading manufacturer, stockist, and exporter of high-strength C95400 aluminum bronze hollow bars, supplying custom ODs, bores, and cut-to-length dimensions for global industrial, marine, and aerospace installations.