DIN 17175 St35.8 Boiler Tubes

DIN 17175 St35.8 Seamless Boiler Tubes | ST35.8 Pipe Supplier USA

Get a Quick Quote
Standard
DIN 17175
Werkstoff
1.0305
Quality grades
St35.8/I and St35.8/III
Type
Seamless

ST35.8 tubes are seamless carbon steel boiler tubes made to DIN 17175. The ST35.8 tube is a heat-resistant steel tube for boilers, steam pipework and pressure vessels. The ST35.8 pipe has a chemical composition of carbon, silicon, manganese, phosphorus and sulfur, and the carbon is kept to 0.17% maximum. At room temperature these tubes have a minimum yield strength of 235 MPa and a tensile strength of 360 to 480 MPa. The DIN 17175 St35.8 tube also has guaranteed strength values at elevated temperature up to 450°C. The ST35.8 seamless tube is supplied in two quality grades, St35.8/I and St35.8/III. ST35.8 tubes are used in boilers, superheaters, economizers, heat exchangers, steam lines, etc. The nearest ASTM equivalent of the ST35.8 tube is ASTM A192 for boiler tubes and ASTM A179 for heat exchanger tubes. USA Piping Solution is a supplier of DIN 17175 ST35.8 pipes and tubes in the USA. We supply these tubes in full lengths and cut lengths with mill test certificates. Other boiler grades are on the Boiler Tubes & Pipes page.

Send Us Your ST35.8 Tube Requirement →

ST35.8 Strength at Elevated Temperature

ST35.8 is ordered for hot service. The yield strength of the tube goes down as the temperature goes up. The table below shows the minimum 0.2% proof strength of St35.8 for a wall thickness up to 16 mm.

Temperature

Proof strength (min)

20°C (68°F)

235 MPa (34 ksi)

200°C (392°F)

185 MPa (27 ksi)

250°C (482°F)

165 MPa (24 ksi)

300°C (572°F)

140 MPa (20 ksi)

350°C (662°F)

120 MPa (17 ksi)

400°C (752°F)

110 MPa (16 ksi)

450°C (842°F)

105 MPa (15 ksi)

The design of a boiler or a steam line must use the value for the working temperature and not the room temperature value.

Applications

  • Boilers: water wall tubes, superheater tubes and economizer tubes.
  • Steam pipework: steam lines, headers and feed water lines.
  • Heat exchangers: tube bundles in shell and tube units. Other grades are on the Heat Exchanger Tubes & Pipes page.
  • Pressure vessels: nozzles and coils that work at elevated temperature.
  • Retubing of German-built boilers: replacement tubes in the original grade and metric size.

Testing & Documentation

ST35.8 tubes are supplied with a mill test certificate to EN 10204 3.1. The certificate shows the heat number, chemical analysis, quality grade and tensile results. The tubes are leak tested by a hydrostatic test or a non-destructive test. Flattening and ring tests are done as per the standard. Third-party inspection can be arranged before shipment. Our Quality Policy page explains how incoming material is checked.

Frequently Asked Questions

1. What is ST35.8 steel tube?

ST35.8 is a seamless carbon steel boiler tube made to DIN 17175. The Werkstoff number is 1.0305. The tube is made for service at elevated temperature.

2. What is the ASTM equivalent of DIN 17175 St35.8?

There is no identical grade. ASTM A192 is the nearest for boiler tubes, ASTM A179 for heat exchanger tubes and ASTM A106 Grade A for pipe.

3. Is ST35.8 the same as P235GH?

P235GH to EN 10216-2 is the grade that replaced St35.8. The two are close but the Werkstoff numbers and the test requirements are not the same. Many mills certify tubes to both.

4. What is the difference between St35.8/I and St35.8/III?

The steel is the same. St35.8/III tubes get extra testing, including non-destructive testing of each tube, and are used for higher pressure and temperature duties.

5. What is the difference between St35 and St35.8?

St35 is a cold-drawn precision tube to DIN 2391 for mechanical and hydraulic use. St35.8 is a boiler tube to DIN 17175 for elevated temperature. The two are not interchangeable.

6. What is the maximum temperature for ST35.8 tubes?

DIN 17175 gives proof strength values for St35.8 up to 450°C (842°F). The limit for a given plant is set by the design code and the working pressure.

Product Grades



Request a Quote

We respect your privacy.