Ferritic stainless steel seamless tubes are chromium steel tubes with little or no nickel. The ferritic seamless tube has a chemical composition of 16 to 23% chromium, and some grades have molybdenum, titanium, niobium or copper added. These tubes are magnetic and they cannot be hardened by heat treatment. The ferritic stainless steel seamless pipe resists chloride stress corrosion cracking, which is the main weakness of the 304 and 316 grades. The tubes also expand less with heat and carry heat better than austenitic tubes. Ferritic stainless steel seamless tubes are made in grades SS 434, SS 436, SS 439, SS 442 and SS 443. These tubes are used in heat exchangers, feedwater heaters, condensers, exhaust systems, furnace parts, etc. USA Piping Solution is a supplier of ferritic stainless steel seamless tubes and pipes in the USA. We supply these tubes with mill test certificates.
Grade Selector
|
Grade |
UNS |
Chromium |
Main addition |
Picked for |
|---|---|---|---|---|
|
SS 434 |
S43400 |
16 to 18% |
Molybdenum |
Better pitting resistance than 430 |
|
SS 436 |
S43600 |
16 to 18% |
Molybdenum and niobium |
As 434, with better behavior after welding and forming |
|
SS 439 |
S43035 |
17 to 19% |
Titanium |
Welded and heated parts; heat exchanger and feedwater heater tubes |
|
SS 442 |
S44200 |
18 to 23% |
None |
Scaling resistance at high temperature |
|
SS 443 |
S44300 |
18 to 23% |
Copper |
Scaling resistance with better corrosion resistance |
Availability of Ferritic Seamless Tubes
SS 439 and SS 443 are listed tube grades in ASTM A268 and they are the two grades normally ordered as seamless tube. SS 434, SS 436 and SS 442 are mainly sheet and welded tube grades. Seamless tubes in these three grades are made to order against the chemical composition of the grade. The grade, size and quantity should be sent first so that the supply route can be confirmed.
Applications
- Heat exchangers and condensers: tubes in chloride-bearing water. Other grades are on the Heat Exchanger Tubes & Pipes page.
- Feedwater heaters: SS 439 tubes in power plants.
- Exhaust systems: SS 434, SS 436 and SS 439 tubes.
- Furnace and burner parts: SS 442 and SS 443 tubes.
Testing & Documentation
Ferritic stainless steel seamless tubes are supplied with a mill test certificate. The certificate shows the heat number, chemical analysis, tensile results and hardness. Each tube is hydrostatically tested or tested by a non-destructive electric test. Flaring or flange tests are done as per ASTM A268. Our Quality Policy page explains how incoming material is checked.
Related Products
SS 439 ERW Pipes & Tubes · SS 436 ERW Pipes & Tubes · Stainless Steel 430 Seamless Tubes · Ferritic SS 444 Pipes & Tubes · Ferritic SS 446 Pipes & Tubes
Frequently Asked Questions
1. What is ferritic stainless steel tube?
It is a chromium stainless steel tube with little or no nickel. It is magnetic and resists chloride stress corrosion cracking.
2. Is SS 439 seamless tube available?
Yes. TP439 is a listed grade in ASTM A268, which covers seamless and welded ferritic tubes.
3. Are SS 434 and SS 436 made as seamless tubes?
These grades are mainly made as sheet and welded tube. Seamless tubes are made to order against the grade chemistry.
4. What is the difference between SS 442 and SS 443?
Both have 18 to 23% chromium. SS 443 has about 1% copper added for better corrosion resistance.
5. What is the difference between SS 434 and SS 436?
Both have 16 to 18% chromium and about 1% molybdenum. SS 436 has niobium added, which improves forming and welding.
6. Are ferritic stainless steel tubes magnetic?
Yes. All ferritic stainless steels are magnetic.