ST44 pipes are carbon steel pipes made to German DIN standards. ST44 steel pipe is the middle grade of the DIN family and it sits between ST37 and ST52 in strength. The ST44 seamless pipe is made to DIN 1629 in grade St44.0. The ST44 welded pipe is made to DIN 1626 in the same grade. These pipes have a minimum yield strength of 275 MPa and a tensile strength of 420 to 550 MPa. The carbon content of ST44 pipe is 0.21% maximum, so the pipe is still easy to weld and form. St44-2 is the structural grade under DIN 17100 and it is now sold as S275JR. ST44 pipes are used in pipework, vessels, machine parts, steel structures, cranes, construction, etc. The nearest ASTM equivalent of ST44 pipe is ASTM A106 Grade B for pressure service and ASTM A500 Grade B for structural use. USA Piping Solution is a supplier and distributor of ST44 steel pipe in the USA. We supply these pipes in full lengths and cut lengths with mill test certificates. Other seamless carbon grades are on the Carbon Steel Seamless Pipes & Tubes page.
ST37 vs ST44 vs ST52 Pipe
ST44 pipe is selected when ST37 is not strong enough and ST52 is more than the design needs. The table below compares the three DIN 1629 pipe grades.
|
Property |
St37.0 |
St44.0 |
St52.0 |
|---|---|---|---|
|
Werkstoff number |
1.0254 |
1.0256 |
1.0421 |
|
Yield strength, wall up to 16 mm (min) |
235 MPa (34 ksi) |
275 MPa (40 ksi) |
355 MPa (51 ksi) |
|
Tensile strength |
350 to 480 MPa |
420 to 550 MPa |
500 to 650 MPa |
|
Elongation, longitudinal (min) |
25% |
21% |
21% |
|
Carbon (max) |
0.17% |
0.21% |
0.22% |
|
Typical use |
General pipework and light structures |
Loaded pipework, machine parts, medium structures |
Heavy structures and high-load parts |
The lower grade is on the ST37 Steel Pipe page. The higher grade is on the St52 Tubes & Pipes page.
Product Forms
- ST44 seamless pipe, St44.0 to DIN 1629: hot-finished pipe for loaded pipework, vessels and machine parts.
- ST44 welded pipe, St44.0 to DIN 1626: for larger diameters and long runs. Other welded grades are on the Carbon Steel Welded Pipes & Tubes page.
- ST44 structural hollow sections, St44-2 / S275: round, square and rectangular.
Applications
- Loaded pipework and vessels: water, air, oil and gas lines where ST37 is too light, within the 300°C limit.
- Machine building: shafts, sleeves, rollers and frames on German-built machinery.
- Steel structures: columns, trusses, crane and conveyor structures in St44-2.
- Export projects: fabrication in the US for plants designed to DIN or EN standards.
Testing & Documentation
ST44 pipes are supplied with a mill test certificate to EN 10204. The certificate shows the heat number, chemical analysis and tensile results. Leak testing is done as per the ordered standard. Third-party inspection can be arranged before shipment. Our Quality Policy page explains how incoming material is checked.
Related Products
ST37 Steel Pipe · St52 Tubes & Pipes · DIN 2391 St44 Seamless Precision Tubes · Carbon Steel Seamless Pipes & Tubes · Carbon Steel Welded Pipes & Tubes
Frequently Asked Questions
1. What is the ASTM equivalent of ST44 steel pipe?
There is no identical grade. ASTM A106 Grade B and A53 Grade B are the nearest for pressure pipe. ASTM A500 Grade B is the nearest for structural tube.
2. Is ST44 the same as S275JR?
St44-2 from DIN 17100 was replaced by S275JR in EN 10025 and the two are treated as the same grade. St44.0 is a pipe grade and has no identical EN grade.
3. What is the difference between ST37 and ST44 pipe?
ST44 pipe is stronger. The minimum yield strength is 275 MPa for ST44 and 235 MPa for ST37. ST44 has slightly more carbon and slightly lower elongation.
4. Can ST44 pipe be welded?
Yes. The carbon content is 0.21% maximum and the pipe is welded by the usual arc welding processes. Preheat depends on the wall thickness and the welding procedure.
5. What is the difference between St44.0 and St44-2?
St44.0 is a pipe grade from DIN 1629 and DIN 1626 and it is tested as pipe. St44-2 is a structural steel from DIN 17100 used for sections, plate and hollow sections.