Stainless steel 440 seamless tubes are high-carbon martensitic steel tubes with 16 to 18% chromium. The SS 440 seamless tube is made in three grades, 440A, 440B and 440C, and the carbon content goes up from A to C. The SS 440C seamless tube has 0.95 to 1.20% carbon and it reaches the highest hardness of all stainless steels after heat treatment. The 440 stainless steel tube is magnetic and it has good wear resistance when hardened. SS 440 seamless pipes and tubes are supplied as hollow bar and mechanical tubing for machined parts, and not as pressure pipe. Stainless steel 440C, 440A and 440B seamless tubes are used for bearing races, bushings, valve seats, nozzles, pump sleeves, wear rings, etc. USA Piping Solution is a supplier of stainless steel 440 seamless tubes in the USA. We supply these tubes with mill test certificates.
440A vs 440B vs 440C
|
Point |
440A |
440B |
440C |
|---|---|---|---|
|
UNS |
S44002 |
S44003 |
S44004 |
|
Carbon |
0.60 to 0.75% |
0.75 to 0.95% |
0.95 to 1.20% |
|
Typical hardness after hardening |
About 56 HRC |
About 58 HRC |
About 60 HRC |
|
Wear resistance |
Good |
Better |
Best |
|
Toughness and corrosion resistance |
Best of the three |
Middle |
Lowest of the three |
A higher carbon content gives more hardness and wear resistance, and less toughness.
SS 440C Seamless Pipes & Tubes
SS 440C seamless tubes have the highest carbon and the highest hardness of the three grades. SS 440C is the standard choice for bearing races, valve seats and wear rings that need about 58 to 60 HRC.
SS 440A Seamless Pipes & Tubes
SS 440A seamless tubes have the lowest carbon of the three grades. SS 440A is tougher and resists corrosion better than 440C after hardening. SS 440A is used for parts that take impact as well as wear.
SS 440B Seamless Pipes & Tubes
SS 440B seamless tubes sit between 440A and 440C in carbon, hardness and toughness. SS 440B is used when 440A is not hard enough and 440C is too brittle for the part.
Testing & Documentation
SS 440 seamless tubes are supplied with a mill test certificate. The certificate shows the heat number, chemical analysis and annealed hardness. Our Quality Policy page explains how incoming material is checked.
Related Products
416 Stainless Steel Seamless Tubing · 420 SS Tubing · SS 431 Seamless Tubing
Frequently Asked Questions
1. What is the difference between 440A, 440B and 440C stainless steel?
The carbon content. 440A has 0.60 to 0.75%, 440B has 0.75 to 0.95% and 440C has 0.95 to 1.20%. More carbon gives more hardness.
2. How hard is 440C stainless steel?
440C reaches about 58 to 60 HRC after hardening and tempering.
3. Can 440C tube be welded?
Welding is not recommended. The high carbon makes the weld crack.
4. Is 440 stainless steel magnetic?
Yes. All three 440 grades are magnetic.
5. Is 440C pipe used for pressure service?
No. 440 is supplied as hollow bar and mechanical tubing for machined wear parts, and not as pressure pipe.