UNS S32520 Seamless Tubes & Pipes

UNS S32520 Super Duplex Seamless Tubes & Pipes Supplier USA | 1.4507

Get a Quick Quote
Standards
ASTM A789 / A790
UNS
S32520
EN
1.4507
Type
Seamless

UNS S32520 seamless tubes and pipes are super duplex stainless steel products with 25% chromium. The UNS S32520 seamless tube has a chemical composition of 24 to 26% chromium, 5.5 to 8% nickel, 3 to 4% molybdenum and 0.20 to 0.35% nitrogen, with a small addition of copper. The high chromium, molybdenum and nitrogen give the S32520 seamless pipe a PREN of 40 minimum. This PREN puts the UNS S32520 tube in the super duplex class, with very good resistance to pitting and crevice corrosion in seawater. The S32520 super duplex pipe has a minimum yield strength of 80 ksi. UNS S32520 seamless tubes and pipes are used in seawater cooling, offshore platforms, desalination plants, scrubbers, chemical plants, etc. USA Piping Solution is a supplier of UNS S32520 seamless tubes and pipes in the USA. We supply these products with mill test certificates. Other grades are on the Super Duplex Steel Pipes & Tubes page.

Send Us Your UNS S32520 Tube or Pipe Requirement →

PREN and the Super Duplex Class

PREN is a number that compares the pitting resistance of stainless steels in chlorides. It is chromium plus 3.3 times molybdenum plus 16 times nitrogen. A duplex steel with a PREN of 40 or more is called super duplex.

Grade

Chromium

Molybdenum

Nitrogen

Other

PREN

UNS S32520

24 to 26%

3.0 to 4.0%

0.20 to 0.35%

Copper 0.5 to 2.0%

40 minimum

UNS S32750 (2507)

24 to 26%

3.0 to 5.0%

0.24 to 0.32%

None

41 minimum

UNS S32760

24 to 26%

3.0 to 4.0%

0.20 to 0.30%

Copper and tungsten, 0.5 to 1.0% each

40 minimum

UNS S32550 (Alloy 255)

24 to 27%

2.9 to 3.9%

0.10 to 0.25%

Copper 1.5 to 2.5%

About 38 to 40

The three super duplex grades have similar strength and corrosion resistance. The grade is normally fixed by the project specification. The other grades are on the S32750 Pipes & Tubes, S32760 Pipes & Tubes and UNS S32550 Seamless Pipes & Tubes pages.

Testing & Documentation

UNS S32520 seamless tubes and pipes are supplied with a mill test certificate. The certificate shows the heat number, chemical analysis, PREN, tensile results and hardness. Each length is hydrostatically tested or tested by a non-destructive electric test. A pitting corrosion test and a ferrite count can be done on request. Our Quality Policy page explains how incoming material is checked.

Frequently Asked Questions

1. What is UNS S32520?

UNS S32520 is a 25% chromium super duplex stainless steel with a PREN of 40 minimum. Its European number is 1.4507.

2. What is the difference between S32520 and S32750?

Both are super duplex grades with the same strength. S32520 has a small copper addition. S32750 has no copper and a slightly higher minimum PREN.

3. What is the difference between S32520 and S32550?

S32520 has more nitrogen and lower carbon, so its PREN is 40 minimum. S32550 has more copper and is used more for acid service.

4. Can UNS S32520 be used in seawater?

Yes. Super duplex grades with a PREN of 40 or more are widely used in seawater systems.

Product Grades



Request a Quote

We respect your privacy.