UNS S32550 seamless pipes and tubes are duplex stainless steel products with 25% chromium and copper. The UNS S32550 seamless pipe has a chemical composition of 24 to 27% chromium, 4.5 to 6.5% nickel, 2.9 to 3.9% molybdenum and 1.5 to 2.5% copper. The copper gives the S32550 seamless tube good resistance to sulfuric acid and phosphoric acid. The duplex structure gives the Alloy 255 pipe a minimum yield strength of 80 ksi, which is more than twice that of 316L. The UNS S32550 pipe also resists wear from slurries because of its high hardness. UNS S32550 seamless pipes and tubes are used in phosphoric acid plants, flue gas scrubbers, slurry lines, seawater systems, pulp and paper plants, etc. USA Piping Solution is a supplier of UNS S32550 seamless pipes and tubes in the USA. We supply these products with mill test certificates. The duplex family is explained in our What Are Duplex Steel Pipes? guide.
What the Copper Does
Most duplex grades have little or no copper. UNS S32550 has 1.5 to 2.5%. Copper improves the resistance of the steel to reducing acids such as sulfuric and phosphoric acid. Together with the high hardness of the alloy, this makes S32550 a common choice for acid slurries, where the pipe must resist corrosion and abrasion at the same time. For stronger sulfuric acid service the next step is a nickel-rich alloy such as Alloy 20 Pipes & Tubes.
Testing & Documentation
UNS S32550 seamless pipes and tubes are supplied with a mill test certificate. The certificate shows the heat number, chemical analysis, tensile results and hardness. Each length is hydrostatically tested or tested by a non-destructive electric test. Corrosion tests and ferrite measurement can be done on request. Our Quality Policy page explains how incoming material is checked.
Related Products
UNS S32520 Super Duplex Seamless Tubes · S32750 Pipes & Tubes · Duplex 2205 Seamless Tubes
Frequently Asked Questions
1. What is UNS S32550?
UNS S32550 is a 25% chromium duplex stainless steel with copper. It is commonly called Alloy 255.
2. Is UNS S32550 a super duplex steel?
It sits at the border. Its PREN is about 38 to 40, and the super duplex class is normally taken as 40 and above.
3. What is the difference between S32550 and 2205?
S32550 has more chromium, added copper and a higher yield strength, 80 ksi against 65 ksi. It resists acids and pitting better than 2205.
4. Is UNS S32550 magnetic?
Yes. Duplex stainless steels are about half ferrite, so they are magnetic.