UNS S32950 seamless tubes and pipes are duplex stainless steel products with high chromium and nitrogen. The UNS S32950 seamless tube has a chemical composition of 26 to 29% chromium, 3.5 to 5.2% nickel, 1 to 2.5% molybdenum and 0.15 to 0.35% nitrogen. The S32950 seamless pipe is a development of Type 329 with nitrogen added and carbon lowered. The nitrogen lets the UNS S32950 tube be welded without loss of toughness in the weld zone. The S32950 duplex pipe has a minimum yield strength of 70 ksi and good resistance to chloride stress corrosion cracking. UNS S32950 seamless tubes and pipes are used in heat exchangers, condensers, chemical plants, pulp and paper plants, brackish water service, etc. USA Piping Solution is a supplier of UNS S32950 seamless tubes and pipes in the USA. We supply these products with mill test certificates.
S32950 vs S32900
|
Point |
UNS S32950 |
UNS S32900 (Type 329) |
|---|---|---|
|
Chromium |
26 to 29% |
23 to 28% |
|
Nitrogen |
0.15 to 0.35% |
Not specified |
|
Carbon (max) |
0.03% |
0.08% |
|
Sulfur (max) |
0.010% |
0.030% |
|
Yield strength (min) |
70 ksi (480 MPa) |
70 ksi (485 MPa) |
|
Welding |
Suitable for welding |
Limited |
Nitrogen helps austenite to form again in the weld zone as it cools. The weld then keeps its toughness and corrosion resistance. The older grade is on the UNS S32900 Seamless Pipes & Tubes page.
Testing & Documentation
UNS S32950 seamless tubes and pipes are supplied with a mill test certificate. The certificate shows the heat number, chemical analysis, tensile results and hardness. Each length is hydrostatically tested or tested by a non-destructive electric test. Our Quality Policy page explains how incoming material is checked.
Related Products
UNS S32900 Seamless Pipes & Tubes · Duplex 2205 Seamless Tubes · S32750 Pipes & Tubes
Frequently Asked Questions
1. What is UNS S32950?
UNS S32950 is a duplex stainless steel with 26 to 29% chromium and added nitrogen. It is a development of Type 329.
2. What is the difference between S32950 and S32900?
S32950 has nitrogen added and lower carbon and sulfur. This makes it weldable. S32900 has no specified nitrogen and is not easy to weld.
3. Is UNS S32950 a super duplex steel?
No. Its typical PREN is about 37, below the level of 40 used for super duplex.
4. Is UNS S32950 tube kept in stock?
It is a specialty grade and is normally made to order.