347H stainless steel seamless pipes and tubes are niobium stabilized austenitic steel products for high-temperature service. The SS 347H seamless pipe has a chemical composition of 17 to 19% chromium and 9 to 13% nickel, with niobium added and the carbon controlled between 0.04 and 0.10%. The niobium stops the 347H seamless tube from sensitizing during welding and during long service at high temperature. The TP347H pipe has higher creep strength than 304H and 321H. The 347H stainless steel pipe has a minimum tensile strength of 75 ksi and a minimum yield strength of 30 ksi. SS 347H seamless pipes and tubes are used in refinery hydroprocessing units, heater tubes, superheaters, steam lines, high-temperature headers, etc. USA Piping Solution is a supplier of 347H stainless steel seamless pipe and tube in the USA. We supply these products with mill test certificates.
347H vs 321H
Both grades are stabilized H grades for the same temperature range. The stabilizing element is different.
|
Point |
347H |
321H |
|---|---|---|
|
Stabilized with |
Niobium (columbium) |
Titanium |
|
Creep strength |
Higher |
Lower |
|
Stabilizer in welding |
Niobium stays in the weld metal |
Titanium is partly lost in the arc |
|
Cost and availability |
Higher cost |
Lower cost, easier to find |
|
Typical use |
Hydroprocessing piping, heavy-wall headers |
Heater tubes, superheater tubes |
347H is chosen when the design needs the higher strength or when the piping specification of the unit calls for it. The titanium grade is on the SS 321H Seamless Tubes & Pipes page.
Applications
- Refinery hydroprocessing: reactor effluent piping, feed and effluent exchanger piping.
- Fired heaters: heater tubes and transfer lines.
- Power plants: superheater and reheater tubes, high-temperature headers.
- Chemical plants: hot process lines above the range of the grades on the Chrome Moly Pipes & Tubes page.
Testing & Documentation
SS 347H seamless pipes and tubes are supplied with a mill test certificate. The certificate shows the heat number, chemical analysis with the niobium content, tensile results and grain size. Each length is hydrostatically tested or tested by a non-destructive electric test. Our Quality Policy page explains how incoming material is checked.
Related Products
SS 321H Seamless Tubes & Pipes · 347 Stainless Steel Seamless Tube · 316H Stainless Steel Seamless Pipe
Frequently Asked Questions
1. What is the difference between 347 and 347H stainless steel?
347H has a controlled carbon content of 0.04 to 0.10% and a grain size requirement. This gives it better creep strength at high temperature.
2. What is the difference between 321H and 347H?
321H is stabilized with titanium. 347H is stabilized with niobium and has higher creep strength. 347H costs more.
3. Why is niobium added to 347H?
Niobium combines with carbon and stops chromium carbides from forming. The steel keeps its corrosion resistance after welding and long heating.
4. Is columbium the same as niobium?
Yes. Columbium (Cb) is the older American name for niobium (Nb). ASTM standards use both names.