Alloy 926 UNS N08926 Seamless Pipes & Tubes

Alloy 926 UNS N08926 Seamless Pipes & Tubes Supplier USA | 6Mo, 1.4529

Get a Quick Quote
Standard
ASTM B677 / ASME SB677
UNS
N08926
EN
1.4529
Common name
Alloy 926
Type
Seamless

UNS N08926 seamless pipes and tubes are super austenitic alloy products with 6 to 7% molybdenum. The Alloy 926 seamless pipe has a chemical composition of 24 to 26% nickel, 19 to 21% chromium and 6 to 7% molybdenum, with nitrogen and copper added. The high molybdenum and nitrogen give the N08926 seamless tube very good resistance to pitting and crevice corrosion in seawater. The high nickel gives the 6Mo pipe good resistance to chloride stress corrosion cracking. The UNS N08926 tube has a minimum tensile strength of 94 ksi and a minimum yield strength of 43 ksi. Alloy 926 seamless pipes and tubes are used in seawater systems, offshore platforms, flue gas scrubbers, desalination plants, pulp bleaching plants, etc. USA Piping Solution is a supplier of UNS N08926 seamless pipes and tubes in the USA. We supply these products with mill test certificates.

Send Us Your UNS N08926 Pipe or Tube Requirement →

The 6Mo Alloy Family

Four alloys with about 6% molybdenum are sold as “6Mo”. They do the same job, and the grade is normally fixed by the project specification.

Alloy

UNS

Nickel

Chromium

Molybdenum

Nitrogen

Copper

Alloy 926

N08926

24 to 26%

19 to 21%

6.0 to 7.0%

0.15 to 0.25%

0.5 to 1.5%

Alloy 925 type

N08925

24 to 26%

19 to 21%

6.0 to 7.0%

0.10 to 0.20%

0.8 to 1.5%

254 SMO type

S31254

17.5 to 18.5%

19.5 to 20.5%

6.0 to 6.5%

0.18 to 0.22%

0.5 to 1.0%

AL-6XN type

N08367

23.5 to 25.5%

20 to 22%

6.0 to 7.0%

0.18 to 0.25%

0.75% max

UNS N08926 has more nickel than S31254 and more nitrogen than N08925. The other alloys are on the Nickel Alloy N08925 Pipe & Tube, SMO 254 Pipes & Tubes and AL-6XN UNS N08367 Pipe & Tube pages.

Testing & Documentation

UNS N08926 seamless pipes and tubes are supplied with a mill test certificate. The certificate shows the heat number, chemical analysis and tensile results. Each length is hydrostatically tested or tested by a non-destructive electric test. A pitting corrosion test can be done on request. Our Quality Policy page explains how incoming material is checked.

Frequently Asked Questions

1. What is UNS N08926?

UNS N08926 is a super austenitic alloy with about 25% nickel, 20% chromium and 6 to 7% molybdenum. It is called Alloy 926 and its European number is 1.4529.

2. What does 6Mo mean?

6Mo is a common name for austenitic alloys with about 6% molybdenum. UNS N08926, N08925, S31254 and N08367 are all sold as 6Mo.

3. What is the difference between N08926 and N08925?

The two alloys have the same nickel, chromium and molybdenum. N08926 has a higher nitrogen range, 0.15 to 0.25%, which gives slightly higher strength and pitting resistance.

4. Is UNS N08926 a duplex steel?

No. It is fully austenitic and non-magnetic. It is often compared with super duplex because both are used in seawater.

5. Is Alloy 926 the same as 254 SMO?

No. Both are 6Mo alloys, but Alloy 926 has about 25% nickel and 254 SMO has about 18% nickel.

Product Grades



Request a Quote

We respect your privacy.