ASTM A671 CD70 EFW Pipe

ASTM A671 CD70 EFW Pipe Supplier USA | A537 Class 1

Get a Quick Quote
Standard
ASTM A671
Grade
CD70
Plate
ASTM A537 Class 1
Type
Electric fusion welded

ASTM A671 CD70 pipes are electric fusion welded steel pipes made from ASTM A537 Class 1 plate. The A671 CD70 pipe is a carbon-manganese-silicon steel pipe and the plate is supplied in the normalized condition. The plate has a tensile strength of 70 to 90 ksi and a minimum yield strength of 50 ksi. The A671 CD70 EFW pipe has the highest yield strength of the common A671 carbon steel grades. The normalized fine grain plate also gives the A671 Gr CD70 pipe good toughness at low temperature. A671 CD70 pipes are used in gas processing plants, LNG terminals, high-pressure headers, offshore process lines, etc. USA Piping Solution is a supplier of ASTM A671 CD70 EFW pipe in the USA. We supply these pipes with mill test certificates and plate certificates. The other grades are on the ASTM A671 EFW Pipe page.

Send Us Your A671 CD70 Pipe Size and Class →

A671 CD70 vs CC70

The two grades have the same tensile strength. CD70 has the higher yield strength.

Point

CD70

CC70

Plate

A537 Class 1

A516 Grade 70

Yield strength (min)

50 ksi (345 MPa)

38 ksi (260 MPa)

Tensile strength

70 to 90 ksi (485 to 620 MPa)

70 to 90 ksi (485 to 620 MPa)

Plate condition

Always normalized

As rolled or normalized

Carbon (max)

0.24%

0.27 to 0.31%

A671 CD70 is selected when the design is based on yield strength, or when lower carbon is wanted at the same tensile strength. The A516 grade is on the ASTM A671 CC70 EFW Pipe page.

Testing & Documentation

A671 CD70 pipes are supplied with a mill test certificate and the A537 Class 1 plate certificate. Tensile tests are done on the plate and across the weld. Radiography and pressure tests are done as per the class. Impact tests are done when ordered. Our Quality Policy page explains how incoming material is checked.

Frequently Asked Questions

1. What is ASTM A671 CD70 pipe?

It is an electric fusion welded pipe made from normalized ASTM A537 Class 1 plate, for atmospheric and lower temperatures.

2. Which plate is used for A671 CD70?

ASTM A537 Class 1, a normalized carbon-manganese-silicon pressure vessel plate.

3. What is the yield strength of A671 CD70 pipe?

The plate has a minimum yield strength of 50 ksi (345 MPa) for thickness up to 2-1/2 in.

4. What is the difference between A671 CD70 and CD80?

CD70 is made from A537 Class 1 plate, which is normalized. CD80 is made from A537 Class 2 plate, which is quenched and tempered and stronger.

Product Grades



Request a Quote

We respect your privacy.