ASTM A672 A55 pipes are electric fusion welded carbon steel pipes made from ASTM A285 Grade C plate. The A672 A55 pipe is the strongest of the A-series grades and the most economical grade of the A672 standard. The A672 A55 EFW pipe has a chemical composition of carbon, manganese, phosphorus and sulfur. The plate has a tensile strength of 55 to 75 ksi and a minimum yield strength of 30 ksi. The A672 Gr A55 pipe is used for general pressure service where high strength and impact testing are not needed. This grade is written as A672 CA55 on some enquiries. A672 A55 pipes are used in water lines, low-pressure steam lines, utility headers, storage terminals, etc. USA Piping Solution is a supplier of ASTM A672 A55 EFW pipe in the USA. We supply these pipes with mill test certificates and plate certificates. The other grades are on the ASTM A672 EFW Pipe page.
A-Series Grades of ASTM A672
|
A672 Grade |
Plate |
Tensile strength |
Yield strength (min) |
|---|---|---|---|
|
A45 |
A285 Grade A |
45 to 65 ksi (310 to 450 MPa) |
24 ksi (165 MPa) |
|
A50 |
A285 Grade B |
50 to 70 ksi (345 to 485 MPa) |
27 ksi (185 MPa) |
|
A55 |
A285 Grade C |
55 to 75 ksi (380 to 515 MPa) |
30 ksi (205 MPa) |
A285 plate is made up to 2 in. thick, so A672 A55 pipe is limited to that wall thickness.
Testing & Documentation
A672 A55 pipes are supplied with a mill test certificate and the A285 Grade C plate certificate. Tensile tests are done on the plate and across the weld. Radiography and pressure tests are done as per the class. Our Quality Policy page explains how incoming material is checked.
Frequently Asked Questions
1. What is ASTM A672 A55 pipe?
It is an electric fusion welded carbon steel pipe made from ASTM A285 Grade C plate.
2. Is A672 CA55 the same as A672 A55?
The correct A672 name is A55. CA55 is the name of the matching grade in ASTM A671. Both are made from A285 Grade C plate.
3. Is there an A672 A60 or A65 grade?
No. The A series uses A285 plate, which has Grades A, B and C only. The A-series pipe grades are A45, A50 and A55.
4. What is the maximum wall thickness of A672 A55 pipe?
A285 plate is made up to 2 in. thick, so the pipe wall is limited to 2 in.