SS 442 welded tubes and pipes are high chromium ferritic stainless steel products for high-temperature service. The SS 442 welded tube has a chemical composition of 18 to 23% chromium, with no nickel or molybdenum added. The high chromium gives the SS 442 welded pipe good resistance to scaling in hot air and combustion gases. The SS 442 tube is magnetic and it cannot be hardened by heat treatment. The 442 stainless steel tube also resists sulfur-bearing gases better than the nickel grades. SS 442 welded tubes and pipes are used in furnace parts, combustion chambers, recuperators, burner nozzles, flue ducts, etc. USA Piping Solution is a supplier of SS 442 welded tubes and pipes in the USA. We supply these tubes with mill test certificates.
Scaling Resistance: SS 430 vs SS 442 vs SS 446
The resistance of a ferritic steel to scaling goes up with the chromium content.
|
Grade |
Chromium |
Typical scaling limit in air, continuous service |
|---|---|---|
|
SS 430 |
16 to 18% |
About 1500°F (815°C) |
|
SS 442 |
18 to 23% |
About 1800°F (980°C) |
|
SS 446 |
23 to 27% |
About 2000°F (1095°C) |
SS 442 is used when SS 430 scales too fast and the cost of SS 446 is not needed. The other grades are on the Ferritic SS 430 ERW Pipes & Tubes and Ferritic SS 446 Pipes & Tubes pages. The copper-bearing grade with the same chromium is on the SS 443 Welded Pipes & Tubes page.
Testing & Documentation
SS 442 welded tubes and pipes are supplied with a mill test certificate. The certificate shows the heat number, chemical analysis and tensile results. The weld is tested by flattening or flaring. Our Quality Policy page explains how incoming material is checked.
Related Products
SS 443 Welded Pipes & Tubes · Ferritic SS 446 Pipes & Tubes · SS 310H Seamless Pipes & Tubes
Frequently Asked Questions
1. What is SS 442 stainless steel?
SS 442 is a ferritic stainless steel with 18 to 23% chromium, made for resistance to scaling at high temperature.
2. What temperature can SS 442 take?
SS 442 resists scaling in air up to about 1800°F (980°C) in continuous service.
3. What is the difference between SS 442 and SS 446?
SS 446 has more chromium, 23 to 27%, and resists scaling to a higher temperature. SS 442 costs less.
4. Is SS 442 magnetic?
Yes. SS 442 is a ferritic steel and it is magnetic.