SS 443 welded pipes and tubes are high chromium ferritic stainless steel products with copper. The SS 443 welded tube has a chemical composition of 18 to 23% chromium and 0.90 to 1.25% copper, with almost no nickel. The copper gives the SS 443 welded pipe better corrosion resistance than plain high chromium grades. The high chromium gives the TP443 tube good resistance to scaling at high temperature. The 443 stainless steel tube is magnetic and it resists chloride stress corrosion cracking. SS 443 welded pipes and tubes are made to ASTM A268, with a minimum tensile strength of 70 ksi and a minimum yield strength of 40 ksi. These tubes are used in heat exchangers, air heaters, recuperators, furnace parts, chemical equipment, etc. USA Piping Solution is a supplier of SS 443 welded pipes and tubes in the USA. We supply these tubes with mill test certificates.
SS 442 vs SS 443
|
Point |
SS 442 |
SS 443 |
|---|---|---|
|
UNS |
S44200 |
S44300 |
|
Chromium |
18 to 23% |
18 to 23% |
|
Copper |
None |
0.90 to 1.25% |
|
Listed in ASTM A268 |
No |
Yes, as TP443 |
|
Best use |
Dry heat and scaling |
Heat with corrosive condensate |
The plain grade is on the SS 442 Welded Tubes & Pipes page.
Applications
- Heat exchangers and air heaters: tubes that see hot gas on one side and condensate on the other. Other grades are on the Heat Exchanger Tubes & Pipes page.
- Recuperators: tubes in flue gas heat recovery.
- Furnace parts: nozzles, baffles and ducts.
- Chemical equipment: tubes in oxidizing acid service.
Testing & Documentation
SS 443 welded pipes and tubes are supplied with a mill test certificate. The certificate shows the heat number, chemical analysis, tensile results and hardness. Each tube is hydrostatically tested or tested by a non-destructive electric test. Flaring, flange or reverse flattening tests are done as per ASTM A268. Our Quality Policy page explains how incoming material is checked.
Related Products
SS 442 Welded Tubes & Pipes · SS 439 ERW Pipes & Tubes · Heat Exchanger Tubes & Pipes
Frequently Asked Questions
1. What is SS 443 stainless steel?
SS 443 is a ferritic stainless steel with 18 to 23% chromium and about 1% copper.
2. What is the difference between SS 442 and SS 443?
SS 443 has copper added. The copper improves the corrosion resistance.
3. Is SS 443 listed in ASTM A268?
Yes. It is listed as grade TP443, for seamless and welded tubes.
4. Is SS 443 magnetic?
Yes. SS 443 is a ferritic steel and it is magnetic.