ST52.3 Steel Pipe

ST52.3 Steel Pipe Supplier USA | St52-3 / S355J2 Pipes & Tubes

Get a Quick Quote
Standards
DIN 17100 / DIN 1629 / EN 10210
Werkstoff
1.0570
EN
S355J2 / S355J2H
Type
Seamless & Welded

ST52.3 pipes are high-strength structural steel pipes made to German DIN standards. The ST52.3 steel pipe is a carbon-manganese steel with silicon, and the carbon is kept to 0.20% maximum. The correct DIN name of this grade is St52-3 and the Werkstoff number is 1.0570. These pipes have a minimum yield strength of 355 MPa and a tensile strength of 490 to 630 MPa. The ST52.3 pipe is impact tested, so it keeps its toughness at low temperature. The ST52.3 seamless pipe and the ST52.3 welded pipe are both easy to weld. St52-3 is now sold as S355J2 under EN 10025 and as S355J2H for hollow sections. ST52.3 pipes are used in cranes, steel structures, bridges, machine frames, offshore structures, heavy vehicles, etc. The nearest ASTM equivalent of ST52.3 pipe is ASTM A572 Grade 50 for structural use and API 5L X52 for line pipe. USA Piping Solution is a supplier of ST52.3 steel pipe in the USA. We supply these pipes in full lengths and cut lengths with mill test certificates. Other seamless carbon grades are on the Carbon Steel Seamless Pipes & Tubes page.

Send Us Your ST52.3 Pipe Requirement →

What the “3” in ST52.3 Means

The number 52 is the old minimum tensile strength, 52 kgf/mm². This is about 510 MPa or 74 ksi. The number 3 is the quality group of DIN 17100. Quality group 3 steel is fully killed and impact tested. The letter after the 3 shows the delivery condition and the test temperature.

Callout

Delivery condition

Impact test

Current EN Grade

St52-3 U

As rolled

27 J at 0°C (32°F)

S355J0

St52-3 N

Normalized

27 J at -20°C (-4°F)

S355J2

ST52.3 without a letter normally means St52-3 N. The letter should be confirmed on the drawing before the order.

Product Forms

  • ST52.3 seamless pipe: hot-finished heavy-wall pipe for machine parts, crane booms and high-load structures.
  • ST52.3 welded pipe: for larger diameters and long structural runs.
  • ST52.3 hollow sections (S355J2H): round, square and rectangular sections for frames, columns and trusses.

Applications

  • Cranes and lifting equipment: booms, jibs, masts and outriggers.
  • Steel structures and bridges: columns, trusses and bracing that work outdoors in cold weather.
  • Machine building: frames, rollers, shafts and press parts on German-built machinery.
  • Heavy vehicles and trailers: chassis members and axle tubes.
  • Offshore and marine structures: secondary steelwork and supports.

What to Put on Your Purchase Order

The purchase order for ST52.3 pipe should carry these five items:

  • The full designation: St52-3 U or St52-3 N, or the Werkstoff number 1.0570.
  • Whether S355J2 or S355J2H is acceptable in place of the DIN grade.
  • Seamless or welded, and round, square or rectangular.
  • Outside diameter and wall thickness in millimeters, plus length.
  • The impact test temperature and the certificate type (EN 10204 3.1 or 3.2).

Testing & Documentation

ST52.3 pipes are supplied with a mill test certificate to EN 10204 3.1. The certificate shows the heat number, chemical analysis, tensile results and impact test results. Dual DIN and EN certification is given where the mill offers it. Third-party inspection can be arranged before shipment. Our Quality Policy page explains how incoming material is checked.

Frequently Asked Questions

1. What is ST52.3 steel pipe?

ST52.3 is a high-strength structural steel pipe. The DIN name is St52-3 to DIN 17100 and the Werkstoff number is 1.0570. The minimum yield strength is 355 MPa.

2. What is the ASTM equivalent of ST52.3?

There is no identical grade. ASTM A572 Grade 50 is the nearest for structural use and API 5L X52 is the nearest for line pipe.

3. Is ST52.3 the same as S355J2?

St52-3 N from DIN 17100 was replaced by S355J2 in EN 10025. The two are treated as the same grade. Hollow sections are sold as S355J2H.

4. What is the difference between ST52 and ST52.3?

ST52 is the strength class. ST52.3 is the structural grade of that class with an impact test. St52.0 is the pipe grade without an impact test, and DIN 2391 St52 is a cold-drawn precision tube.

5. Can ST52.3 pipe be welded?

Yes. ST52.3 pipe is welded by the usual arc welding processes. Preheat depends on the wall thickness and the welding procedure.

6. Can ST52.3 pipe be used at low temperature?

St52-3 N is impact tested at -20°C (-4°F). Service below this temperature needs a grade tested at a lower temperature.

Product Grades



Request a Quote

We respect your privacy.