SS 410S Seamless Tubes & Pipes

Stainless Steel 410S Seamless Tubes & Pipes Supplier USA | UNS S41008

Get a Quick Quote
UNS
S41008
EN
1.4000
Type
Seamless
Nominal
12% chromium, low carbon

Stainless steel 410S seamless tubes and pipes are low-carbon 12% chromium steel products. The SS 410S seamless tube has a chemical composition of 11.5 to 13.5% chromium, and the carbon is kept to 0.08% maximum. The low carbon stops the 410S seamless pipe from hardening when it cools from welding temperature. The weld zone of the 410S tube stays soft and ductile, so the tube can be welded without cracking. The 410S stainless steel tube is magnetic and it resists oxidation up to about 1300°F (705°C). SS 410S seamless tubes and pipes are used in refinery columns, heat exchangers, furnace parts, petrochemical equipment, etc. USA Piping Solution is a supplier of stainless steel 410S seamless tube and pipe in the USA. We supply these products with mill test certificates.

Send Us Your SS 410S Tube or Pipe Requirement →

410 vs 410S

Point

410

410S

UNS

S41000

S41008

Carbon

0.08 to 0.15%

0.08% max

Structure

Martensitic

Mostly ferritic

Hardens by heat treatment

Yes

No

Weld zone

Hard and brittle unless heat treated

Stays soft

Best use

Parts that need strength and hardness

Parts that are welded and need ductility

The hardenable grade is on the Stainless Steel 410 Seamless Tubing page.

Testing & Documentation

SS 410S seamless tubes and pipes are supplied with a mill test certificate. The certificate shows the heat number, chemical analysis, tensile results and hardness. Each length is hydrostatically tested or tested by a non-destructive electric test. Our Quality Policy page explains how incoming material is checked.

Frequently Asked Questions

1. What is the difference between 410 and 410S stainless steel?

410S has a lower carbon content, 0.08% maximum. It does not harden by heat treatment or on welding. 410 has 0.08 to 0.15% carbon and can be hardened.

2. Can 410S be hardened?

No. The low carbon keeps 410S soft after heating and cooling.

3. Is 410S stainless steel magnetic?

Yes. 410S is magnetic in all conditions.

4. Can 410S tube be welded?

Yes. The weld zone stays soft and ductile, so 410S is welded without the cracking risk of 410.

Product Grades



Request a Quote

We respect your privacy.