ASTM A672 C70 pipes are electric fusion welded carbon steel pipes for high-pressure service at moderate temperatures. The A672 C70 pipe is made from ASTM A516 Grade 70 plate and it is the strongest grade of the C series. The A672 C70 EFW pipe has a chemical composition of carbon, manganese, silicon, phosphorus and sulfur. The plate has a tensile strength of 70 to 90 ksi and a minimum yield strength of 38 ksi. The A672 Gr C70 pipe is used where the pressure is high and the wall would be too thick in a lower grade. This grade is written as A672 CC70 on some enquiries. A672 C70 pipes are used in high-pressure headers, boiler feed lines, gas compression plants, heavy-wall process lines, etc. USA Piping Solution is a supplier of ASTM A672 C70 EFW pipe in the USA. We supply these pipes with mill test certificates and plate certificates. The other grades are on the ASTM A672 EFW Pipe page.
C-Series Grades of ASTM A672
The C grades are all made from ASTM A516 plate. The number is the minimum tensile strength in ksi.
|
A672 Grade |
Plate |
Tensile strength |
Yield strength (min) |
Elongation in 2 in. (min) |
|---|---|---|---|---|
|
C55 |
A516 Grade 55 |
55 to 75 ksi (380 to 515 MPa) |
30 ksi (205 MPa) |
27% |
|
C60 |
A516 Grade 60 |
60 to 80 ksi (415 to 550 MPa) |
32 ksi (220 MPa) |
25% |
|
C65 |
A516 Grade 65 |
65 to 85 ksi (450 to 585 MPa) |
35 ksi (240 MPa) |
23% |
|
C70 |
A516 Grade 70 |
70 to 90 ksi (485 to 620 MPa) |
38 ksi (260 MPa) |
21% |
The design stress in the piping codes is based on the tensile and yield strength. A672 C70 has the highest values of the series, so it gives the thinnest wall at a given pressure. The lower grades are on the ASTM A672 C60 EFW Pipe and ASTM A672 C65 EFW Pipe pages.
Heavy-Wall A672 C70 Pipe
A672 C70 pipe is often ordered in walls of 1 in. and above. Heavy walls are normally supplied as Class 22 or Class 32, because the piping codes call for heat treatment after welding above a set wall thickness. In sizes below NPS 16 the seamless pipe of the same tensile strength is ASTM A106 Grade C Pipe. For lines that are too hot for carbon steel, the alloy grades are on the ASTM A691 EFW Alloy Steel Pipe page.
Testing & Documentation
A672 C70 pipes are supplied with a mill test certificate and the A516 Grade 70 plate certificate. Tensile tests are done on the plate and across the weld. Radiography and pressure tests are done as per the class. Our Quality Policy page explains how incoming material is checked.
Frequently Asked Questions
1. What is ASTM A672 C70 pipe?
It is an electric fusion welded carbon steel pipe made from ASTM A516 Grade 70 plate, for high-pressure service at moderate temperatures.
2. Is A672 CC70 the same as A672 C70?
The correct A672 name is C70. CC70 is the name of the grade in ASTM A671 that uses the same plate.
3. What is the difference between A672 C65 and C70?
C70 is stronger. The plate tensile strength is 70 to 90 ksi for C70 and 65 to 85 ksi for C65.
4. What does A672 C70 Class 22 mean?
The pipe is made from A516 Grade 70 plate, stress relieved, fully radiographed and pressure tested.