IS 3091 aluminium bronze hollow bar is hollow bar supplied to the chemistry and mechanical requirements of IS 3091:1999 where the customer specifies it. Before you order, one thing is worth knowing. IS 3091:1999 is the Indian Standard for aluminium bronze ingots and castings for overhead fittings in electric traction, with 9 to 11% aluminium, 4 to 5% iron and 0.1 to 0.5% manganese, and a minimum as cast tensile strength of 600 MPa. The Indian Standard for aluminium bronze rods, bars and sections is a different one, IS 10569:2005. Many suppliers never mention this, so we say it up front.
USA Piping Solution supplies IS 3091 aluminium bronze bar as hollow round, with an EN 10204 3.1 mill test certificate with every lot.
IS 3091 Aluminium Bronze Hollow Bar Specification
|
Parameter |
Specification / Designation |
|---|---|
|
Standard |
IS 3091:1999, Aluminium Bronze Ingots and Castings for Overhead Fittings in Electric Traction (First Revision), Bureau of Indian Standards |
|
Rods, Bars and Sections |
IS 10569:2005 |
|
General Aluminium Bronze Ingots and Castings |
IS 305:1981 |
Applications of IS 3091 Aluminium Bronze Hollow Bar
IS 3091 aluminium bronze hollow bar is engineered for load-bearing, high-wear, and corrosive service applications where superior mechanical toughness and galling resistance are critical. Common uses include:
- Bushings and bearings: Resists seizing, wear, and shock deformation in heavy industrial and rotating assemblies.
- Gears: Provides high tooth-flank durability and fatigue strength in power transmission systems.
- Valve and pump parts: Withstands erosion-corrosion, cavitation, and pressure stress in fluid and marine handling.
- Electric traction fittings: Delivers reliable mechanical strength, wear resistance, and corrosion protection in railway and transit hardware.
Need custom-sized IS 3091 aluminium bronze hollow bars? Contact USA Piping Solution today for competitive pricing and immediate stock availability.
Frequently Asked Questions
1. What is IS 3091?
IS 3091:1999 is the Indian Standard for aluminium bronze ingots and castings for overhead fittings in electric traction. It sets the chemistry as 9.00 to 11.00% aluminium, 4.00 to 5.00% iron and 0.10 to 0.50% manganese, with copper as the balance.
2. Does IS 3091 cover hollow bar?
The title of IS 3091 covers ingots and castings, not rods, bars or sections. We supply hollow bar to the chemistry and mechanical requirements of IS 3091 where the customer specifies it, and we confirm in writing what certification can be provided.
3. What is the difference between IS 3091 and IS 10569?
IS 3091 covers aluminium bronze ingots and castings for overhead fittings in electric traction. IS 10569 covers aluminium bronze rods, bars and sections. They cover different product forms, so check which one your drawing calls for.
4. What is the composition required by IS 3091?
Aluminium 9.00 to 11.00%, iron 4.00 to 5.00%, manganese 0.10 to 0.50% and copper as the balance.
5. What is the minimum tensile strength under IS 3091?
The as cast minimums are 600 MPa tensile strength (about 87 ksi), 250 MPa yield strength (about 36 ksi) and 20% elongation. We give the actual results for your hollow bar on the mill certificate.
6. What is the ASTM equivalent of IS 3091?
The standards cover different product forms, so they are not equivalents. For comparison only, the nearest ASTM grade is C95400 under ASTM B505, which has 10.0 to 11.5% aluminium and 3.0 to 5.0% iron.
Request a Custom Quote for IS 3091 Aluminium Bronze Hollow Bar
USA Piping Solution is a premier global manufacturer, stockist, and exporter of IS 3091 Aluminium Bronze Hollow Bar, supplying custom OD, bore, and cut-to-length dimensions from the United States with full EN 10204 3.1 mill test certification on every lot.